NVIDIA Accelerated FreeBSD Graphics Driver README and Installation Guide

    NVIDIA Corporation
    Last Updated: $Date$
    Most Recent Driver Version: 100.14.09

Published by
NVIDIA Corporation
2701 San Tomas Expressway
Santa Clara, CA
95050


NOTICE:

ALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS,
DIAGNOSTICS, LISTS, AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, "MATERIALS")
ARE BEING PROVIDED "AS IS." NVIDIA MAKES NO WARRANTIES, EXPRESSED, IMPLIED,
STATUTORY, OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EXPRESSLY DISCLAIMS
ALL IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A
PARTICULAR PURPOSE. Information furnished is believed to be accurate and
reliable. However, NVIDIA Corporation assumes no responsibility for the
consequences of use of such information or for any infringement of patents or
other rights of third parties that may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of
NVIDIA Corporation. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all
information previously supplied. NVIDIA Corporation products are not
authorized for use as critical components in life support devices or systems
without express written approval of NVIDIA Corporation.

NVIDIA, the NVIDIA logo, NVIDIA nForce, GeForce, NVIDIA Quadro, Vanta, TNT2,
TNT, RIVA, RIVA TNT, Quincunx Antialiasing, and TwinView are registered
trademarks or trademarks of NVIDIA Corporation in the United States and/or
other countries.

FreeBSD is a registered trademark of the FreeBSD Foundation. Linux is a
registered trademark of Linus Torvalds. Intel and Pentium are registered
trademarks of Intel Corporation. Athlon is a registered trademark of Advanced
Micro Devices. OpenGL is a registered trademark of Silicon Graphics Inc. PCI
Express is a registered trademarks and/or service marks of PCI-SIG. Windows is
a registered trademark of Microsoft Corporation in the United States and other
countries. Other company and product names may be trademarks or registered
trademarks of the respective owners with which they are associated.


Copyright 2006 NVIDIA Corporation. All rights reserved.

______________________________________________________________________________

TABLE OF CONTENTS
______________________________________________________________________________

Chapter 1. Introduction
Chapter 2. Installing the NVIDIA Driver
Chapter 3. Linux Compatibility Support
Chapter 4. Configuring X for the NVIDIA Driver
Chapter 5. Frequently Asked Questions
Chapter 6. Common Problems
Chapter 7. Known Issues
Chapter 8. OpenGL Environment Variable Settings
Chapter 9. Configuring AGP
Chapter 10. Configuring TwinView
Chapter 11. Support for GLX in Xinerama
Chapter 12. Configuring Multiple X Screens on One Card
Chapter 13. Configuring TV-Out
Chapter 14. The XRandR Extension
Chapter 15. Configuring a Notebook
Chapter 16. Programming Modes
Chapter 17. Flipping and UBB
Chapter 18. The X Composite Extension
Chapter 19. The nvidia-settings Utility
Chapter 20. SLI and Multi-GPU FrameRendering
Chapter 21. Frame Lock and Genlock
Chapter 22. NVIDIA Contact Info and Additional Resources
Chapter 23. Credits
Chapter 24. Acknowledgements

Appendix A. Minimum Software Requirements
Appendix B. Installed Components
Appendix C. The Sysctl Interface
Appendix D. Configuring Low-level Parameters
Appendix A. Supported NVIDIA GPU Products
Appendix B. X Config Options
Appendix C. Display Device Names
Appendix D. GLX Support
Appendix E. Dots Per Inch
Appendix F. Tips for New FreeBSD Users

______________________________________________________________________________

Chapter 1. Introduction
______________________________________________________________________________


1A. ABOUT THE NVIDIA ACCELERATED FREEBSD GRAPHICS DRIVER

The NVIDIA Accelerated FreeBSD Graphics Driver brings accelerated 2D
functionality and high-performance OpenGL support to FreeBSD x86 with the use
of NVIDIA graphics processing units (GPUs).

These drivers provide optimized hardware acceleration for OpenGL and X
applications and support nearly all recent NVIDIA GPU products (see Appendix E
for a complete list of supported GPUs). TwinView, TV-Out and flat panel
displays are also supported.


1B. ABOUT THIS DOCUMENT

This document provides instructions for the installation and use of the NVIDIA
Accelerated FreeBSD Graphics Driver. Chapter 2, Chapter 3 and Chapter 4 walk
the user through the process of downloading, installing and configuring the
driver. Chapter 5 addresses frequently asked questions about the installation
process, and Chapter 6 provides solutions to common problems. The remaining
chapters include details on different features of the NVIDIA FreeBSD Driver.
Frequently asked questions about specific tasks are included in the relevant
chapters.


1C. ABOUT THE AUDIENCE

It is assumed that the user and reader of this document has at least a basic
understanding of FreeBSD techniques and terminology. However, new FreeBSD
users can refer to Appendix J for details on parts of the installation
process.


1D. ADDITIONAL INFORMATION

In case additional information is required, Chapter 22 provides contact
information for NVIDIA FreeBSD driver resources, as well as a brief listing of
external resources.

______________________________________________________________________________

Appendix A. Minimum Software Requirements
______________________________________________________________________________

The official minimum software requirements for the NVIDIA FreeBSD Graphics
Driver are as follows:

    Software Element                      Min Requirement
    ----------------------------------    ----------------------------------
    Kernel                                FreeBSD 5-STABLE (5.3 or later)
    XFree86/X.Org                         4.2/6.7.0

Additionally, the kernel source tree must be installed in /usr/src/sys
(package 'ssys' installed)

Note that FreeBSD -STABLE versions older than FreeBSD 5.3 and FreeBSD 6.x/7.x
-CURRENT development snapshots are not supported.

______________________________________________________________________________

Chapter 2. Installing the NVIDIA Driver
______________________________________________________________________________

This installation procedure will likely be simplified further in the future,
but for the moment you will need to download the NVIDIA FreeBSD Graphics
Driver archives from the NVIDIA website, extract them to a temporary location
of your choice, and run the following from the root of the extracted directory
hierarchy:

    % make install

This will compile the NVIDIA FreeBSD kernel module, install it, and kldload
it. It will also remove any conflicting OpenGL libraries, and install the
NVIDIA OpenGL libraries. The '/dev/nvidia' device files will be created
(unless the system is using devfs), and your '/boot/loader.conf' file will be
updated to automatically load the NVIDIA kernel module on boot, as well as the
Linux ABI compatiability module should you not have it compiled into your
kernel.

______________________________________________________________________________

Appendix B. Installed Components
______________________________________________________________________________

The NVIDIA Accelerated FreeBSD Graphics Driver consists of the following
components.

    Installed File                        Location
    ----------------------------------    ----------------------------------
    nvidia.ko                             /boot/modules
    libGL.so                              /usr/X11R6/lib
    libGL.so.1                            /usr/X11R6/lib
    libnvidia-tls.so                      /usr/X11R6/lib
    libnvidia-tls.so.1                    /usr/X11R6/lib
    libnvidia-cfg.so                      /usr/X11R6/lib
    libnvidia-cfg.so.1                    /usr/X11R6/lib
    libGLcore.so                          /usr/X11R6/lib
    libGLcore.so.1                        /usr/X11R6/lib
    nvidia_drv.so                         /usr/X11R6/lib/modules/drivers
    libglx.so                             /usr/X11R6/lib/modules/extensions
    libglx.so.1                           /usr/X11R6/lib/modules/extensions
    nvidia-xconfig                        /usr/X11R6/bin
    nvidia-xconfig.1                      /usr/X11R6/man/man1
    nvidia-settings                       /usr/X11R6/bin
    nvidia-settings.1                     /usr/X11R6/man/man1
    nvidia0                               /dev
    nvidia1                               /dev
    nvidia2                               /dev
    nvidia3                               /dev
    nvidiactl                             /dev
    libGL.so.100.14.09                    /compat/linux/usr/lib
    libnvidia-tls.so.100.14.09            /compat/linux/usr/lib
    libGLcore.so.100.14.09                /compat/linux/usr/lib


______________________________________________________________________________

Chapter 3. Linux Compatibility Support
______________________________________________________________________________

If you wish to run Linux OpenGL applications on your FreeBSD computer, you
will need to make sure that several prerequisites are met.

First, you should follow the basic Linux compatibility installation guide in
the FreeBSD Handbook (install the linux_base package, etc). Once the basic
components are in place, you will need to install the NVIDIA Linux OpenGL
libraries in '/compat/linux/usr/lib' (do not brandelf them!); if the
'/compat/linux/usr/lib/' directory exists when you install the FreeBSD driver,
the Linux compatibility OpenGL libraries will automatically be installed.

Additionally, the 'nvidia.ko' kernel module needs to be built with support for
the Linux ABI compatibility layer. This is the case by default; as a
consequence, the 'nvidia.ko' kernel module requires the 'linux.ko' module to
be loaded.

Note: If you have no need for Linux ABI compatibility and do not wish to load
'linux.ko', you can build the 'nvidia.ko' kernel module without support for
the Linux ABI compatibility layer (see 'nv-freebsd.h' for details).

______________________________________________________________________________

Chapter 4. Configuring X for the NVIDIA Driver
______________________________________________________________________________

The X configuration file provides a means to configure the X server. This
section describes the settings necessary to enable the NVIDIA driver. A
comprehensive list of parameters is provided in Appendix F.

The NVIDIA Driver includes a utility called nvidia-xconfig, which is designed
to make editing the X configuration file easy. You can also edit it by hand.


4A. USING NVIDIA-XCONFIG TO CONFIGURE THE X SERVER

nvidia-xconfig will find the X configuration file and modify it to use the
NVIDIA X driver. In most cases, you can simply answer "Yes" when the installer
asks if it should run it. If you need to reconfigure your X server later, you
can run nvidia-xconfig again from a terminal. nvidia-xconfig will make a
backup copy of your configuration file before modifying it.

Note that the X server must be restarted for any changes to its configuration
file to take effect.

More information about nvidia-xconfig can be found in the nvidia-xconfig
manual page by running.

    % man nvidia-xconfig




4B. MANUALLY EDITING THE CONFIGURATION FILE

In April 2004 the X.Org Foundation released an X server based on the XFree86
server. While your release may use the X.Org X server, rather than XFree86,
the differences between the two should have no impact on NVIDIA FreeBSD users
with two exceptions:

   o The X.Org configuration file is '/etc/X11/xorg.conf' while the XFree86
     configuration file is '/etc/X11/XF86Config'. The files use the same
     syntax. This document refers to both files as "the X config file".

   o The X.Org log file is '/var/log/Xorg.#.log' while the XFree86 log file is
     '/var/log/XFree86.#.log' (where '#' is the server number -- usually 0).
     The format of the log files is nearly identical. This document refers to
     both files as "the X log file".

In order for any changes to be read into the X server, you must edit the file
used by the server. While it is not unreasonable to simply edit both files, it
is easy to determine the correct file by searching for the line

    (==) Using config file:

in the X log file. This line indicates the name of the X config file in use.

If you do not have a working X config file, there are a few different ways to
obtain one. A sample config file is included both with the XFree86
distribution and with the NVIDIA driver package (at
'/usr/X11R6/share/doc/NVIDIA_GLX-1.0/'). Tools for generating a config file
(such as 'xf86config') are generally included with FreeBSD. Additional
information on the X config syntax can be found in the XF86Config manual page
(`man XF86Config` or `man xorg.conf`).

If you have a working X config file for a different driver (such as the "nv"
or "vesa" driver), then simply edit the file as follows.

Remove the line:

      Driver "nv"
  (or Driver "vesa")
  (or Driver "fbdev")

and replace it with the line:

    Driver "nvidia"

Remove the following lines:

    Load "dri"
    Load "GLCore"

In the "Module" section of the file, add the line (if it does not already
exist):

    Load "glx"

There are numerous options that may be added to the X config file to tune the
NVIDIA X driver. See Appendix F for a complete list of these options.

Once you have completed these edits to the X config file, you may restart X
and begin using the accelerated OpenGL libraries. After restarting X, any
OpenGL application should automatically use the new NVIDIA libraries. (NOTE:
If you encounter any problems, see Chapter 6 for common problem diagnoses.)

______________________________________________________________________________

Chapter 5. Frequently Asked Questions
______________________________________________________________________________

This section provides answers to frequently asked questions associated with
the NVIDIA FreeBSD x86 Driver and its installation. Common problem diagnoses
can be found in Chapter 6 and tips for new users can be found in Appendix J.
Also, detailed information for specific setups is provided in the Appendices.


NVIDIA DRIVER

Q. Where should I start when diagnosing display problems?

A. One of the most useful tools for diagnosing problems is the X log file in
   '/var/log'. Lines that begin with "(II)" are information, "(WW)" are
   warnings, and "(EE)" are errors. You should make sure that the correct
   config file (i.e. the config file you are editing) is being used; look for
   the line that begins with:
   
       (==) Using config file:
   
   Also make sure that the NVIDIA driver is being used, rather than the "nv"
   or "vesa" driver. Search for
   
       (II) LoadModule: "nvidia"
   
   Lines from the driver should begin with:
   
       (II) NVIDIA(0)
   
   

Q. How can I increase the amount of data printed in the X log file?

A. By default, the NVIDIA X driver prints relatively few messages to stderr
   and the X log file. If you need to troubleshoot, then it may be helpful to
   enable more verbose output by using the X command line options -verbose and
   -logverbose, which can be used to set the verbosity level for the 'stderr'
   and log file messages, respectively. The NVIDIA X driver will output more
   messages when the verbosity level is at or above 5 (X defaults to verbosity
   level 1 for 'stderr' and level 3 for the log file). So, to enable verbose
   messaging from the NVIDIA X driver to both the log file and 'stderr', you
   could start X with the verbosity level set to 5, by doing the following
   
       % startx -- -verbose 5 -logverbose 5
   
   

Q. I have read that the NVIDIA FreeBSD Driver is not a native driver, but sits
   on top of the Linux ABI compatibility layer. Is this true?

A. No, the NVIDIA FreeBSD Graphics Driver is a native driver. It does provide
   Linux OpenGL libraries in addition to the native, FreeBSD libraries to
   enable users to run Linux OpenGL applications.


Q. Is the NVIDIA FreeBSD Accelerated Graphics Driver thread-safe?

A. This release is thread-safe on FreeBSD 5.3 or later systems making use of
   the libpthread or libthr KSE threading libraries. On these systems, the
   NVIDIA Linux ABI compatibility libraries are fully thread-safe as well.


Q. Why can't the Linux compatibility libraries correctly determine if they are
   used in a multithreaded application?

A. The Linux compatibility libraries are not able to correctly determine if
   they are used in a multithreaded application because the %gs segment
   register is not initialized correctly for Linux compatibility.

   The '__GL_SINGLE_THREADED' environment variable (set to "1") can be used to
   work around this issue, but at the cost of thread-safeness.


Q. Why do applications that use DGA graphics fail?

A. The NVIDIA driver does not support the graphics component of the
   XFree86-DGA (Direct Graphics Access) extension. Applications can use the
   XDGASelectInput() function to acquire relative pointer motion, but
   graphics-related functions such as XDGASetMode() and XDGAOpenFramebuffer()
   will fail.

   The graphics component of XFree86-DGA is not supported because it requires
   a CPU mapping of framebuffer memory. As graphics cards ship with increasing
   quantities of video memory, the NVIDIA X driver has had to switch to a more
   dynamic memory mapping scheme that is incompatible with DGA. Furthermore,
   DGA does not cooperate with other graphics rendering libraries such as Xlib
   and OpenGL because it accesses GPU resources directly.

   NVIDIA recommends that applications use OpenGL or Xlib, rather than DGA,
   for graphics rendering. Using rendering libraries other than DGA will yield
   better performance and improve interoperability with other X applications.


Q. My kernel log contains messages that are prefixed with "Xid"; what do these
   messages mean?

A. "Xid" messages indicate that a general GPU error occurred, most often due
   to the driver misprogramming the GPU or to corruption of the commands sent
   to the GPU. These messages provide diagnostic information that can be used
   by NVIDIA to aid in debugging reported problems.


Q. On what NVIDIA hardware is the EXT_framebuffer_object OpenGL extension
   supported?

A. EXT_framebuffer_object is supported on GeForce FX, Quadro FX, and newer
   GPUs.


Q. I use the Coolbits overclocking interface to adjust my graphics card's
   clock frequencies, but the defaults are reset whenever X is restarted. How
   do I make my changes persistent?

A. Clock frequency settings are not saved/restored automatically by default to
   avoid potential stability and other problems that may be encountered if the
   chosen frequency settings differ from the defaults qualified by the
   manufacturer. You can use the command line below in '~/.xinitrc' to
   automatically apply custom clock frequency settings when the X server is
   started:
   
       # nvidia-settings -a GPUOverclockingState=1 -a
   GPU2DClockFreqs=<GPU>,<MEM> -a GPU3DClockFreqs=<GPU>,<MEM>
   
   Here '<GPU>' and '<MEM>' are the desired GPU and video memory frequencies
   (in MHz), respectively.


Q. Why is the refresh rate not reported correctly by utilities that use the
   XRandR X extension (e.g., the GNOME "Screen Resolution Preferences" panel,
   `xrandr -q`, etc)?

A. The XRandR X extension is not presently aware of multiple display devices
   on a single X screen; it only sees the MetaMode bounding box, which may
   contain one or more actual modes. This means that if multiple MetaModes
   have the same bounding box, XRandR will not be able to distinguish between
   them.

   In order to support DynamicTwinView, the NVIDIA X driver must make each
   MetaMode appear to be unique to XRandR. Presently, the NVIDIA X driver
   accomplishes this by using the refresh rate as a unique identifier.

   You can use `nvidia-settings -q RefreshRate` to query the actual refresh
   rate on each display device.

   This behavior can be disabled by setting the X configuration option
   "DynamicTwinView" to FALSE.

   For details, see Chapter 10.


______________________________________________________________________________

Chapter 6. Common Problems
______________________________________________________________________________

This section provides solutions to common problems associated with the NVIDIA
FreeBSD x86 Driver.

Q. My X server fails to start, and my X log file contains the error:
   
   (EE) NVIDIA(0): The NVIDIA kernel module does not appear to
   (EE) NVIDIA(0):      be receiving interrupts generated by the NVIDIA
   graphics
   (EE) NVIDIA(0):      device PCI:x:x:x. Please see the COMMON PROBLEMS
   (EE) NVIDIA(0):      section in the README for additional information.
   
   
A. This can be caused by a variety of problems, such as PCI IRQ routing
   errors, I/O APIC problems or conflicts with other devices sharing the IRQ
   (or their drivers).

   If possible, configure your system such that your graphics card does not
   share its IRQ with other devices (try moving the graphics card to another
   slot if applicable, unload/disable the driver(s) for the device(s) sharing
   the card's IRQ, or remove/disable the device(s)).


Q. My X server fails to start, and my X log file contains the error:
   
   (EE) NVIDIA(0): The interrupt for NVIDIA graphics device PCI:x:x:x
   (EE) NVIDIA(0):      appears to be edge-triggered. Please see the COMMON
   (EE) NVIDIA(0):      PROBLEMS section in the README for additional
   information.
   
   
A. An edge-triggered interrupt means that the kernel has programmed the
   interrupt as edge-triggered rather than level-triggered in the Advanced
   Programmable Interrupt Controller (APIC). Edge-triggered interrupts are not
   intended to be used for sharing an interrupt line between multiple devices;
   level-triggered interrupts are the intended trigger for such usage. When
   using edge-triggered interrupts, it is common for device drivers using that
   interrupt line to stop receiving interrupts. This would appear to the end
   user as those devices no longer working, and potentially as a full system
   hang. These problems tend to be more common when multiple devices are
   sharing that interrupt line.


Q. X starts for me, but OpenGL applications terminate immediately.

A. If X starts but you have trouble with OpenGL, you most likely have a
   problem with other libraries in the way, or there are stale symlinks. See
   Appendix B for details.

   You should also check that the correct extensions are present;
   
       % xdpyinfo
   
   should show the "GLX" and "NV-GLX" extensions present. If these two
   extensions are not present, then there is most likely a problem loading the
   glx module, or it is unable to implicitly load GLcore. Check your X config
   file and make sure that you are loading glx (see Chapter 4). If your X
   config file is correct, then check the X log file for warnings/errors
   pertaining to GLX. Also check that all of the necessary symlinks are in
   place (refer to Appendix B).


Q. When Xinerama is enabled, my stereo glasses are shuttering only when the
   stereo application is displayed on one specific X screen. When the
   application is displayed on the other X screens, the stereo glasses stop
   shuttering.

A. This problem occurs with DDC and "blue line" stereo glasses, that get the
   stereo signal from one video port of the graphics card. When a X screen
   does not display any stereo drawable the stereo signal is disabled on the
   associated video port.

   Forcing stereo flipping allows the stereo glasses to shutter continuously.
   This can be done by enabling the OpenGL control "Force Stereo Flipping" in
   nvidia-settings, or by setting the X configuration option
   "ForceStereoFlipping" to "1".


Q. Stereo is not in sync across multiple displays.

A. There are two cases where this may occur. If the displays are attached to
   the same GPU, and one of them is out of sync with the stereo glasses, you
   will need to reconfigure your monitors to drive identical mode timings; see
   Chapter 16 for details.

   If the displays are attached to different GPUs, the only way to synchronize
   stereo across the displays is with a G-Sync device, which is only supported
   by certain Quadro cards. See Chapter 21 for details. This applies to
   seperate GPUs on seperate cards as well as seperate GPUs on the same card,
   such as Quadro FX 4500 X2. Note that the Quadro FX 4500 X2 only provides a
   single DIN connector for stereo, tied to the bottommost GPU. In order to
   synchronize onboard stereo on the other GPU you must use a G-Sync device.


Q. X fails to start, and during bootup time I get error messages
   
   nvidia0: NVRM: NVIDIA REG resource alloc failed.
   
   or
   
   nvidia0: NVRM: NVIDIA IRQ resource alloc failed.
   
   
A. The system bios has not properly setup your graphics card; FreeBSD can't
   currently setup PCI devices that the BIOS leaves unconfigured. Uncheck
   "PNP-OS" in your system bios.


Q. X fails to start, and during bootup time I get the following error message:
   
   nvidia0: NVRM: NVIDIA MEM resource alloc failed.
   
   
A. On certain FreeBSD kernels, it may be necessary to add the following line
   to '/boot/loader.conf':
   
   hw.pci.allow_unsupported_io_range="1"
   
   This should allow the NVIDIA kernel module to attach.


Q. My X server fails to start, and my X log file contains the error:
   
   (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module!
   
   
A. Nothing will work if the NVIDIA kernel module does not function properly.
   If you see anything in the X log file like
   
   (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module!
   
   then there is most likely a problem with the NVIDIA kernel module.

   The NVIDIA kernel module may print error messages indicating a problem --
   to view these messages check the output of `dmesg`, '/var/log/messages', or
   wherever syslog is directed to place kernel messages. These messages are
   prepended with "NVRM".


Q. When I attempt to start `nvidia-settings`, I get an error message of the
   form:
   
    Shared object "libgtk-x11-2.0.so.400" not found, required by
   nvidia-settings
   
   
A. Due to differences between the gtk+-2.x ports packages included with
   different FreeBSD 5.x releases, the prebuilt nvidia-settings binary shipped
   with the NVIDIA driver may not work with FreeBSD releases more recent than
   FreeBSD 5.3.

   If you have a recent ports package of gtk+-2.x and gmake installed on your
   system, you can build the nvidia-installer utility from source to solve
   this problem.

   Download nvidia-settings-1.0.tar.gz (or the latest version) from
   ftp://download.nvidia.com/XFree86/nvidia-settings You can then extract,
   build and install it (to '/usr/local/bin') with:
   
       % gmake install
   
   

Q. When I attempt to run `nvidia-xconfig` after the NVIDIA FreeBSD graphics
   driver installation, I get an error message of the form:
   
   nvidia-xconfig: Command not found.
   
   
A. Depending on the shell you are using, you may need to force it to recompute
   its internal table of executable files present in the directories listed in
   the '$PATH' variable. Assuming you are using the FreeBSD default shell you
   can do so by issuing the command:
   
       % rehash
   
   

Q. When I attempt to start a Linux application as 'root', I get the error
   message:
   
   NVIDIA: failed to execute '/sbin/modprobe': No such file or directory.
   
   
A. When initialized by an application executed with 'root' privileges, the
   NVIDIA Linux OpenGL library, shipped with the NVIDIA FreeBSD graphics
   driver for Linux ABI compatibility, will attempt to load the NVIDIA Linux
   kernel module and fail because /sbin/modprobe is absent. You can work
   around this problem by creating a symbolic link from '/usr/bin/true' to
   '/compat/linux/sbin/modprobe':
   
       % ln -s /usr/bin/true /compat/linux/sbin/modprobe
   
   

Q. My system runs, but seems unstable.

A. Your stability problems may be AGP-related. See Chapter 9 for details.


Q. OpenGL applications are running slowly

A. The application is probably using a different library that still remains on
   your system, rather than the NVIDIA supplied OpenGL library. See Appendix B
   for details.


Q. There are problems running Quake2.

A. Quake2 requires some minor setup to get it going. First, in the Quake2
   directory, the install creates a symlink called 'libGL.so' that points at
   'libMesaGL.so'. This symlink should be removed or renamed. Second, in order
   to run Quake2 in OpenGL mode, you must type
   
       % quake2 +set vid_ref glx +set gl_driver libGL.so
   
   Quake2 does not seem to support any kind of full-screen mode, but you can
   run your X server at the same resolution as Quake2 to emulate full-screen
   mode.


Q. I am using either nForce of nForce2 internal graphics, and I see warnings
   like this in my X log file:
   
   Not using mode "1600x1200" (exceeds valid memory bandwidth usage)
   
   
A. Integrated graphics have more strict memory bandwidth limitations that
   limit the resolution and refresh rate of the modes you request. To work
   around this, you can reduce the maximum refresh rate by lowering the upper
   value of the VertRefresh range in the 'Monitor' section of your X config
   file. Though not recommended, you can disable the memory bandwidth test
   with the NoBandWidthTest X config file option.


Q. X takes a long time to start (possibly several minutes).

A. Most of the X startup delay problems we have found are caused by incorrect
   data in video BIOSes about what display devices are possibly connected or
   what i2c port should be used for detection. You can work around these
   problems with the X config option IgnoreDisplayDevices (see the description
   in Appendix F).


Q. Fonts are incorrectly sized after installing the NVIDIA driver.

A. Incorrectly sized fonts are generally caused by incorrect DPI (Dots Per
   Inch) information. You can check what X thinks the physical size of your
   monitor is, by running:
   
    % xdpyinfo | grep dimensions
   
   This will report the size in pixels, and in millimeters.

   If these numbers are wrong, you can correct them by modifying the X
   server's DPI setting. See Appendix I for details.


Q. General problems with ALi chipsets

A. There are some known timing and signal integrity issues on ALi chipsets.
   The following tips may help stabilize problematic ALI systems:
   
      o Disable TURBO AGP MODE in the BIOS.
   
      o When using a P5A upgrade to BIOS Revision 1002 BETA 2.
   
      o When using 1007, 1007A or 1009 adjust the IO Recovery Time to 4
        cycles.
   
      o AGP is disabled by default on some ALi chipsets (ALi1541, ALi1647) to
        work around severe system stability problems with these chipsets. See
        the comments for NVreg_EnableALiAGP in 'os-registry.c' to force AGP
        on anyway.
   
   

Q. Using GNOME configuration utilities, I am unable to get a resolution above
   800x600.

A. The installation of GNOME provided in operating systems such as Red Hat
   Enterprise Linux 4 and Solaris 10 Update 2 contain several competing
   interfaces for specifying resolution:
   
   
       'System Settings' -> 'Display'
   
   
   which will update the X configuration file, and
   
   
       'Applications' -> 'Preferences' -> 'Screen Resolution'
   
   
   which will update the per-user screen resolution using the XRandR
   extension. Your desktop resolution will be limited to the smaller of the
   two settings. Be sure to check the setting of each.


Q. X does not restore the VGA console when run on a TV. I get this error
   message in my X log file:
   
   Unable to initialize the X int10 module; the console may not be
   restored correctly on your TV.
   
   
A. The NVIDIA X driver uses the X Int10 module to save and restore console
   state on TV out, and will not be able to restore the console correctly if
   it cannot use the Int10 module. If you have built the X server yourself,
   please be sure you have built the Int10 module. If you are using a build of
   the X server provided by your operating system and are missing the Int10
   module, contact your operating system distributor.


______________________________________________________________________________

Chapter 7. Known Issues
______________________________________________________________________________

The following problems still exist in this release and are in the process of
being resolved.

Known Issues

Notebooks

    If you are using a notebook see the "Known Notebook Issues" in Chapter 15.

FSAA

    When FSAA is enabled (the __GL_FSAA_MODE environment variable is set to a
    value that enables FSAA and a multisample visual is chosen), the rendering
    may be corrupted when resizing the window.

libGL DSO finalizer and pthreads

    When a multithreaded OpenGL application exits, it is possible for libGL's
    DSO finalizer (also known as the destructor, or "_fini") to be called
    while other threads are executing OpenGL code. The finalizer needs to free
    resources allocated by libGL. This can cause problems for threads that are
    still using these resources. Setting the environment variable
    "__GL_NO_DSO_FINALIZER" to "1" will work around this problem by forcing
    libGL's finalizer to leave its resources in place. These resources will
    still be reclaimed by the operating system when the process exits. Note
    that the finalizer is also executed as part of dlclose(3), so if you have
    an application that dlopens(3) and dlcloses(3) libGL repeatedly,
    "__GL_NO_DSO_FINALIZER" will cause libGL to leak resources until the
    process exits. Using this option can improve stability in some
    multithreaded applications, including Java3D applications.

XVideo and the Composite X extension

    XVideo will not work correctly when Composite is enabled unless using
    X.Org 7.1 or later. See Chapter 18.

This section describes problems that will not be fixed. Usually, the source of
the problem is beyond the control of NVIDIA. Following is the list of
problems:

Problems that Will Not Be Fixed

Gigabyte GA-6BX Motherboard

    This motherboard uses a LinFinity regulator on the 3.3 V rail that is only
    rated to 5 A -- less than the AGP specification, which requires 6 A. When
    diagnostics or applications are running, the temperature of the regulator
    rises, causing the voltage to the NVIDIA GPU to drop as low as 2.2 V.
    Under these circumstances, the regulator cannot supply the current on the
    3.3 V rail that the NVIDIA GPU requires.

    This problem does not occur when the graphics card has a switching
    regulator or when an external power supply is connected to the 3.3 V rail.

VIA KX133 and 694X Chip sets with AGP 2x

    On Athlon motherboards with the VIA KX133 or 694X chip set, such as the
    ASUS K7V motherboard, NVIDIA drivers default to AGP 2x mode to work around
    insufficient drive strength on one of the signals.

Irongate Chip sets with AGP 1x

    AGP 1x transfers are used on Athlon motherboards with the Irongate chipset
    to work around a problem with signal integrity.

ALi chipsets, ALi1541 and ALi1647

    On ALi1541 and ALi1647 chipsets, NVIDIA drivers disable AGP to work around
    timing issues and signal integrity issues. See Chapter 6 for more
    information on ALi chipsets.

NV-CONTROL versions 1.8 and 1.9

    Version 1.8 of the NV-CONTROL X Extension introduced target types for
    setting and querying attributes as well as receiving event notification on
    targets. Targets are objects like X Screens, GPUs and G-Sync devices.
    Previously, all attributes were described relative to an X Screen. These
    new bits of information (target type and target id) were packed in a
    non-compatible way in the protocol stream such that addressing X Screen 1
    or higher would generate an X protocol error when mixing NV-CONTROL client
    and server versions.

    This packing problem has been fixed in the NV-CONTROL 1.10 protocol,
    making it possible for the older (1.7 and prior) clients to communicate
    with NV-CONTROL 1.10 servers. Furthermore, the NV-CONTROL 1.10 client
    library has been updated to accommodate the target protocol packing bug
    when communicating with a 1.8 or 1.9 NV-CONTROL server. This means that
    the NV-CONTROL 1.10 client library should be able to communicate with any
    version of the NV-CONTROL server.

    NVIDIA recommends that NV-CONTROL client applications relink with version
    1.10 or later of the NV-CONTROL client library (libXNVCtrl.a, in the
    nvidia-settings-1.0.tar.gz tarball). The version of the client library can
    be determined by checking the NV_CONTROL_MAJOR and NV_CONTROL_MINOR
    definitions in the accompanying nv_control.h.

    The only web released NVIDIA FreeBSD driver that is affected by this
    problem (i.e., the only driver to use either version 1.8 or 1.9 of the
    NV-CONTROL X extension) is 1.0-8756.


______________________________________________________________________________

Chapter 8. OpenGL Environment Variable Settings
______________________________________________________________________________


8A. FULL SCENE ANTIALIASING

Antialiasing is a technique used to smooth the edges of objects in a scene to
reduce the jagged "stairstep" effect that sometimes appears. Full-scene
antialiasing is supported on GeForce or newer hardware. By setting the
appropriate environment variable, you can enable full-scene antialiasing in
any OpenGL application on these GPUs.

Several antialiasing methods are available and you can select between them by
setting the __GL_FSAA_MODE environment variable appropriately. Note that
increasing the number of samples taken during FSAA rendering may decrease
performance.

The following tables describe the possible values for __GL_FSAA_MODE and the
effects that they have on various NVIDIA GPUs.



    __GL_FSAA_MODE     GeForce, GeForce2, Quadro, and Quadro2 Pro
    ---------------    ------------------------------------------------------
    0                  FSAA disabled
    1                  FSAA disabled
    2                  FSAA disabled
    3                  1.5 x 1.5 Supersampling
    4                  2 x 2 Supersampling
    5                  FSAA disabled
    6                  FSAA disabled
    7                  FSAA disabled




    __GL_FSAA_MODE     GeForce4 MX, GeForce4 4xx Go, Quadro4 380,550,580
                       XGL, and Quadro4 NVS
    ---------------    ------------------------------------------------------
    0                  FSAA disabled
    1                  2x Bilinear Multisampling
    2                  2x Quincunx Multisampling
    3                  FSAA disabled
    4                  2 x 2 Supersampling
    5                  FSAA disabled
    6                  FSAA disabled
    7                  FSAA disabled




    __GL_FSAA_MODE     GeForce3, Quadro DCC, GeForce4 Ti, GeForce4 4200 Go,
                       and Quadro4 700,750,780,900,980 XGL
    ---------------    ------------------------------------------------------
    0                  FSAA disabled
    1                  2x Bilinear Multisampling
    2                  2x Quincunx Multisampling
    3                  FSAA disabled
    4                  4x Bilinear Multisampling
    5                  4x Gaussian Multisampling
    6                  2x Bilinear Multisampling by 4x Supersampling
    7                  FSAA disabled




    __GL_FSAA_MODE     GeForce FX, GeForce 6xxx, GeForce 7xxx, Quadro FX
    ---------------    ------------------------------------------------------
    0                  FSAA disabled
    1                  2x Bilinear Multisampling
    2                  2x Quincunx Multisampling
    3                  FSAA disabled
    4                  4x Bilinear Multisampling
    5                  4x Gaussian Multisampling
    6                  2x Bilinear Multisampling by 4x Supersampling
    7                  4x Bilinear Multisampling by 4x Supersampling
    8                  4x Bilinear Multisampling by 2x Supersampling
                       (available on GeForce FX and later GPUs; not
                       available on Quadro GPUs)




    __GL_FSAA_MODE     GeForce 8xxx, G8xGL
    ---------------    ------------------------------------------------------
    0                  FSAA disabled
    1                  2x Bilinear Multisampling
    2                  FSAA disabled
    3                  FSAA disabled
    4                  4x Bilinear Multisampling
    5                  FSAA disabled
    6                  FSAA disabled
    7                  4x Bilinear Multisampling by 4x Supersampling
    8                  FSAA disabled
    9                  8x Bilinear Multisampling
    10                 8x
    11                 16x
    12                 16xQ
    13                 8x Bilinear Multisampling by 4x Supersampling



8B. ANISOTROPIC TEXTURE FILTERING

Automatic anisotropic texture filtering can be enabled by setting the
environment variable __GL_LOG_MAX_ANISO. The possible values are:

    __GL_LOG_MAX_ANISO                    Filtering Type
    ----------------------------------    ----------------------------------
    0                                     No anisotropic filtering
    1                                     2x anisotropic filtering
    2                                     4x anisotropic filtering
    3                                     8x anisotropic filtering
    4                                     16x anisotropic filtering

4x and greater are only available on GeForce3 or newer GPUs; 16x is only
available on GeForce 6800 or newer GPUs.


8C. VBLANK SYNCING

Setting the environment variable __GL_SYNC_TO_VBLANK to a non-zero value will
force glXSwapBuffers to sync to your monitor's vertical refresh (perform a
swap only during the vertical blanking period).

When using __GL_SYNC_TO_VBLANK with TwinView, OpenGL can only sync to one of
the display devices; this may cause tearing corruption on the display device
to which OpenGL is not syncing. You can use the environment variable
__GL_SYNC_DISPLAY_DEVICE to specify to which display device OpenGL should
sync. You should set this environment variable to the name of a display
device; for example "CRT-1". Look for the line "Connected display device(s):"
in your X log file for a list of the display devices present and their names.
You may also find it useful to review Chapter 10 "Configuring Twinview" and
the section on Ensuring Identical Mode Timings in Chapter 16.


8D. DISABLING CPU-SPECIFIC FEATURES

Setting the environment variable __GL_FORCE_GENERIC_CPU to a non-zero value
will inhibit the use of CPU-specific features such as MMX, SSE, or 3DNOW!. Use
of this option may result in performance loss.


8E. CONTROLLING THE SORTING OF OPENGL FBCONFIGS

The NVIDIA GLX implementation sorts FBConfigs returned by glXChooseFBConfig()
as described in the GLX specification. To disable this behavior set
__GL_SORT_FBCONFIGS to 0 (zero), then FBConfigs will be returned in the order
they were received from the X server. To examine the order in which FBConfigs
are returned by the X server run:

nvidia-settings --glxinfo

This option may be be useful to work around problems in which applications
pick an unexpected FBConfig.


8F. OPENGL YIELD BEHAVIOR

There are several cases where the NVIDIA OpenGL driver needs to wait for
external state to change before continuing. To avoid consuming too much CPU
time in these cases, the driver will sometimes yield so the kernel can
schedule other processes to run while the driver waits. For example, when
waiting for free space in a command buffer, if the free space has not become
available after a certain number of iterations, the driver will yield before
it continues to loop.

By default, the driver calls sched_yield() to do this. However, this can cause
the calling process to be scheduled out for a relatively long period of time
if there are other, same-priority processes competing for time on the CPU. One
example of this is when an OpenGL-based composite manager is moving and
repainting a window and the X server is trying to update the window as it
moves, which are both CPU-intensive operations.

You can use the __GL_YIELD environment variable to work around these
scheduling problems. This variable allows the user to specify what the driver
should do when it wants to yield. The possible values are:

    __GL_YIELD         Behavior
    ---------------    ------------------------------------------------------
    <unset>            By default, OpenGL will call sched_yield() to yield.
    "NOTHING"          OpenGL will never yield.
    "USLEEP"           OpenGL will call usleep(0) to yield.



8G. CONTROLLING WHICH OPENGL FBCONFIGS ARE AVAILABLE

The NVIDIA GLX implementation will hide FBConfigs that are associated with a
32-bit ARGB visual when the XLIB_SKIP_ARGB_VISUALS environment variable is
defined. This matches the behavior of libX11, which will hide those visuals
from XGetVisualInfo and XMatchVisualInfo. This environment variable is useful
when applications are confused by the presence of these FBConfigs.

______________________________________________________________________________

Chapter 9. Configuring AGP
______________________________________________________________________________

There are several choices for configuring the NVIDIA kernel module's use of
AGP: you can choose to either use the NVIDIA AGP module (NVAGP), or the AGP
module that comes with the FreeBSD kernel (AGPGART). This is controlled
through the "NvAGP" option in your X config file:

    Option "NvAgp" "0"  ... disables AGP support
    Option "NvAgp" "1"  ... use NVAGP, if possible
    Option "NvAgp" "2"  ... use AGPGART, if possible
    Option "NvAGP" "3"  ... try AGPGART; if that fails, try NVAGP

Unlike other operating systems such as Linux, this option is not the only
controlling factor at this point; because of known problems, 'nvidia.ko' is
built without support for FreeBSD's AGP driver by default. This behavior can
be changed, see 'nv-freebsd.h' for details.

Note that if you built nvidia.ko with support for the FreeBSD driver it will
not load unless 'agp.ko' is loaded. 'agp.ko' is special in that you can not
load it after the system boot is complete, you need to append the following
line to '/boot/loader.conf' to make sure it is pre-loaded:

    # -- load FreeBSD AGP GART driver -- #
    agp_load="YES"

Also note that if 'agp.ko' is loaded, it could conflict with the NVIDIA AGP
GART driver (NvAGP), resulting in stability problems; for this reason, the
NVIDIA driver will abort NvAGP initialization when it detects 'agp.ko'.

Current FreeBSD releases are shipped with 'agp.ko' built into the kernel; in
order to allow NvAGP to work, the kernel can be rebuilt without 'device agp'
or the following entry added to '/boot/device.hints':

    hint.agp.0.disabled="1"

When built with support for the FreeBSD AGP driver, 'nvidia.ko' will fall back
to using NvAGP when it doesn't detect 'agp.ko' (this will be the case when
'agp.ko' does not support your AGP chipset or was explicitely disabled with
device hints).

It is highly recommended that you use the NVIDIA AGP driver.

The following AGP chipsets are supported by the NVIDIA AGP driver; for all
other chipsets it is recommended that you use the AGPGART module.

    Supported AGP Chipsets
    ----------------------------------------------------------------------
    Intel 440LX
    Intel 440BX
    Intel 440GX
    Intel 815 ("Solano")
    Intel 820 ("Camino")
    Intel 830M
    Intel 840 ("Carmel")
    Intel 845 ("Brookdale")
    Intel 845G
    Intel 850 ("Tehama")
    Intel 855 ("Odem")
    Intel 860 ("Colusa")
    Intel 865G ("Springdale")
    Intel 875P ("Canterwood")
    Intel E7205 ("Granite Bay")
    Intel E7505 ("Placer")
    AMD 751 ("Irongate")
    AMD 761 ("IGD4")
    AMD 762 ("IGD4 MP")
    AMD 8151 ("Lokar")
    VIA 8371
    VIA 82C694X
    VIA KT133
    VIA KT266
    VIA KT400
    VIA P4M266
    VIA P4M266A
    VIA P4X400
    VIA K8T800
    VIA K8N800
    VIA PT880
    VIA KT880
    RCC CNB20LE
    RCC 6585HE
    Micron SAMDDR ("Samurai")
    Micron SCIDDR ("Scimitar")
    NVIDIA nForce
    NVIDIA nForce2
    NVIDIA nForce3
    ALi 1621
    ALi 1631
    ALi 1647
    ALi 1651
    ALi 1671
    SiS 630
    SiS 633
    SiS 635
    SiS 645
    SiS 646
    SiS 648
    SiS 648FX
    SiS 650
    SiS 651
    SiS 655
    SiS 655FX
    SiS 661
    SiS 730
    SiS 733
    SiS 735
    SiS 745
    SiS 755
    ATI RS200M


If you are experiencing AGP stability problems, you should be aware of the
following:

Additional AGP Information

AGP drive strength BIOS setting (Via-based motherboards)

    Many Via-based motherboards allow adjusting the AGP drive strength in the
    system BIOS. The setting of this option largely affects system stability,
    the range between 0xEA and 0xEE seems to work best for NVIDIA hardware.
    Setting either nibble to 0xF generally results in severe stability
    problems.

    If you decide to experiment with this, you need to be aware of the fact
    that you are doing so at your own risk and that you may render your system
    unbootable with improper settings until you reset the setting to a working
    value (w/ a PCI graphics card or by resetting the BIOS to its default
    values).

System BIOS version

    Make sure you have the latest system BIOS provided by the motherboard
    manufacturer.

    On ALi1541 and ALi1647 chipsets, NVIDIA drivers disable AGP to work around
    timing and signal integrity problems. You can force AGP to be enabled on
    these chipsets by setting NVreg_EnableALiAGP to 1. Note that this may
    cause the system to become unstable.

    Early system BIOS revisions for the ASUS A7V8X-X KT400 motherboard
    misconfigure the chipset when an AGP 2.x graphics card is installed; if X
    hangs on your ASUS KT400 system with NvAGP enabled and the installed
    graphics card is not an AGP 8x device, make sure that you have the latest
    system BIOS installed.


______________________________________________________________________________

Chapter 10. Configuring TwinView
______________________________________________________________________________

TwinView is a mode of operation where two display devices (digital flat
panels, CRTs, and TVs) can display the contents of a single X screen in any
arbitrary configuration. This method of multiple monitor use has several
distinct advantages over other techniques (such as Xinerama):


   o A single X screen is used. The NVIDIA driver conceals all information
     about multiple display devices from the X server; as far as X is
     concerned, there is only one screen.

   o Both display devices share one frame buffer. Thus, all the functionality
     present on a single display (e.g., accelerated OpenGL) is available with
     TwinView.

   o No additional overhead is needed to emulate having a single desktop.


If you are interested in using each display device as a separate X screen, see
Chapter 12.


10A. X CONFIG TWINVIEW OPTIONS

To enable TwinView, you must specify the following option in the Device
section of your X Config file:

    Option "TwinView"

You may also use any of the following options, though they are not required:

    Option "MetaModes"                "<list of MetaModes>"

    Option "SecondMonitorHorizSync"   "<hsync range(s)>"
    Option "SecondMonitorVertRefresh" "<vrefresh range(s)>"

    Option "HorizSync"                "<hsync range(s)>"
    Option "VertRefresh"              "<vrefresh range(s)>"

    Option "TwinViewOrientation"      "<relationship of head 1 to head 0>"
    Option "ConnectedMonitor"         "<list of connected display devices>"

See detailed descriptions of each option below.

Alternatively, you can enable TwinView by running

    nvidia-xconfig --twinview

and restarting your X server. Or, you can configure TwinView dynamically in
the "Display Configuration" page in nvidia-settings.


10B. DETAILED DESCRIPTION OF OPTIONS


TwinView

    This option is required to enable TwinView; without it, all other TwinView
    related options are ignored.

SecondMonitorHorizSync
SecondMonitorVertRefresh

    You specify the constraints of the second monitor through these options.
    The values given should follow the same convention as the "HorizSync" and
    "VertRefresh" entries in the Monitor section. As the XF86Config man page
    explains it: the ranges may be a comma separated list of distinct values
    and/or ranges of values, where a range is given by two distinct values
    separated by a dash. The HorizSync is given in kHz, and the VertRefresh is
    given in Hz.

    These options are normally not needed: by default, the NVIDIA X driver
    retrieves the valid frequency ranges from the display device's EDID (see
    Appendix F for a description of the "UseEdidFreqs" option). The
    SecondMonitor options will override any frequency ranges retrieved from
    the EDID.

HorizSync
VertRefresh

    Which display device is "first" and which is "second" is often unclear.
    For this reason, you may use these options instead of the SecondMonitor
    versions. With these options, you can specify a semicolon-separated list
    of frequency ranges, each optionally prepended with a display device name.
    For example:
    
        Option "HorizSync"   "CRT-0: 50-110;  DFP-0: 40-70"
        Option "VertRefresh" "CRT-0: 60-120;  DFP-0: 60"
    
    See Appendix G on Display Device Names for more information.

    These options are normally not needed: by default, the NVIDIA X driver
    retrieves the valid frequency ranges from the display device's EDID (see
    Appendix F for a description of the "UseEdidFreqs" option). The
    "HorizSync" and "VertRefresh" options override any frequency ranges
    retrieved from the EDID or any frequency ranges specified with the
    "SecondMonitorHorizSync" and "SecondMonitorVertRefresh" options.

MetaModes

    MetaModes are "containers" that store information about what mode should
    be used on each display device at any given time. Even if only one display
    device is actively in use, the NVIDIA X driver always uses a MetaMode to
    encapsulate the mode information per display device, so that it can
    support dynamically enabling TwinView.

    Multiple MetaModes list the combinations of modes and the sequence in
    which they should be used. When the NVIDIA driver tells X what modes are
    available, it is really the minimal bounding box of the MetaMode that is
    communicated to X, while the "per display device" mode is kept internal to
    the NVIDIA driver. In MetaMode syntax, modes within a MetaMode are comma
    separated, and multiple MetaModes are separated by semicolons. For
    example:
    
        "<mode name 0>, <mode name 1>; <mode name 2>, <mode name 3>"
    
    Where <mode name 0> is the name of the mode to be used on display device 0
    concurrently with <mode name 1> used on display device 1. A mode switch
    will then cause <mode name 2> to be used on display device 0 and <mode
    name 3> to be used on display device 1. Here is an example MetaMode:
    
        Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768"
    
    If you want a display device to not be active for a certain MetaMode, you
    can use the mode name "NULL", or simply omit the mode name entirely:
    
        "1600x1200, NULL; NULL, 1024x768"
    
    or
    
        "1600x1200; , 1024x768"
    
    Optionally, mode names can be followed by offset information to control
    the positioning of the display devices within the virtual screen space;
    e.g.,
    
        "1600x1200 +0+0, 1024x768 +1600+0; ..."
    
    Offset descriptions follow the conventions used in the X "-geometry"
    command line option; i.e., both positive and negative offsets are valid,
    though negative offsets are only allowed when a virtual screen size is
    explicitly given in the X config file.

    When no offsets are given for a MetaMode, the offsets will be computed
    following the value of the TwinViewOrientation option (see below). Note
    that if offsets are given for any one of the modes in a single MetaMode,
    then offsets will be expected for all modes within that single MetaMode;
    in such a case offsets will be assumed to be +0+0 when not given.

    When not explicitly given, the virtual screen size will be computed as the
    the bounding box of all MetaMode bounding boxes. MetaModes with a bounding
    box larger than an explicitly given virtual screen size will be discarded.

    A MetaMode string can be further modified with a "Panning Domain"
    specification; e.g.,
    
        "1024x768 @1600x1200, 800x600 @1600x1200"
    
    A panning domain is the area in which a display device's viewport will be
    panned to follow the mouse. Panning actually happens on two levels with
    TwinView: first, an individual display device's viewport will be panned
    within its panning domain, as long as the viewport is contained by the
    bounding box of the MetaMode. Once the mouse leaves the bounding box of
    the MetaMode, the entire MetaMode (i.e., all display devices) will be
    panned to follow the mouse within the virtual screen. Note that individual
    display devices' panning domains default to being clamped to the position
    of the display devices' viewports, thus the default behavior is just that
    viewports remain "locked" together and only perform the second type of
    panning.

    The most beneficial use of panning domains is probably to eliminate dead
    areas -- regions of the virtual screen that are inaccessible due to
    display devices with different resolutions. For example:
    
        "1600x1200, 1024x768"
    
    produces an inaccessible region below the 1024x768 display. Specifying a
    panning domain for the second display device:
    
        "1600x1200, 1024x768 @1024x1200"
    
    provides access to that dead area by allowing you to pan the 1024x768
    viewport up and down in the 1024x1200 panning domain.

    Offsets can be used in conjunction with panning domains to position the
    panning domains in the virtual screen space (note that the offset
    describes the panning domain, and only affects the viewport in that the
    viewport must be contained within the panning domain). For example, the
    following describes two modes, each with a panning domain width of 1900
    pixels, and the second display is positioned below the first:
    
        "1600x1200 @1900x1200 +0+0, 1024x768 @1900x768 +0+1200"
    
    Because it is often unclear which mode within a MetaMode will be used on
    each display device, mode descriptions within a MetaMode can be prepended
    with a display device name. For example:
    
        "CRT-0: 1600x1200,  DFP-0: 1024x768"
    
    If no MetaMode string is specified, then the X driver uses the modes
    listed in the relevant "Display" subsection, attempting to place matching
    modes on each display device.

TwinViewOrientation

    This option controls the positioning of the second display device relative
    to the first within the virtual X screen, when offsets are not explicitly
    given in the MetaModes. The possible values are:
    
        "RightOf"  (the default)
        "LeftOf"
        "Above"
        "Below"
        "Clone"
    
    When "Clone" is specified, both display devices will be assigned an offset
    of 0,0.

    Because it is often unclear which display device is "first" and which is
    "second", TwinViewOrientation can be confusing. You can further clarify
    the TwinViewOrientation with display device names to indicate which
    display device is positioned relative to which display device. For
    example:
    
        "CRT-0 LeftOf DFP-0"
    
    
ConnectedMonitor

    With this option you can override what the NVIDIA kernel module detects is
    connected to your graphics card. This may be useful, for example, if any
    of your display devices do not support detection using Display Data
    Channel (DDC) protocols. Valid values are a comma-separated list of
    display device names; for example:
    
        "CRT-0, CRT-1"
        "CRT"
        "CRT-1, DFP-0"
    
    WARNING: this option overrides what display devices are detected by the
    NVIDIA kernel module, and is very seldom needed. You really only need this
    if a display device is not detected, either because it does not provide
    DDC information, or because it is on the other side of a KVM
    (Keyboard-Video-Mouse) switch. In most other cases, it is best not to
    specify this option.


Just as in all X config entries, spaces are ignored and all entries are case
insensitive.


10C. DYNAMIC TWINVIEW

Using the NV-CONTROL X extension, the display devices in use by an X screen,
the mode pool for each display device, and the MetaModes for each X screen can
be dynamically manipulated. The "Display Configuration" page in
nvidia-settings uses this functionality to modify the MetaMode list and then
uses XRandR to switch between MetaModes. This gives the ability to dynamically
configure TwinView.

The details of how this works are documented in the nv-control-dpy.c sample
NV-CONTROL client in the nvidia-settings source tarball.

Because the NVIDIA X driver can now transition into and out of TwinView
dynamically, MetaModes are always used internally by the NVIDIA X driver,
regardless of how many display devices are currently in use by the X screen
and regardless of whether the TwinView X configuration option was specified.

One implication of this implementation is that each MetaMode must be uniquely
identifiable to the XRandR X extension. Unfortunately, two MetaModes with the
same bounding box will look the same to XRandR. For example, two MetaModes
with different orientations:

    "CRT: 1600x1200 +0+0, DFP: 1600x1200 +1600+0"
    "CRT: 1600x1200 +1600+0, DFP: 1600x1200 +0+0"

will look identical to the XRandR or XF86VidMode X extensions, because they
have the same total size (3200x1200), and nvidia-settings would not be able to
use XRandR to switch between these MetaModes. To work around this limitation,
the NVIDIA X driver "lies" about the refresh rate of each MetaMode, using the
refresh rate of the MetaMode as a unique identifier.

The XRandR extension is currently being redesigned by the X.Org community, so
the refresh rate workaround may be removed at some point in the future. This
workaround can also be disabled by setting the "DynamicTwinView" X
configuration option to FALSE, which will disable NV-CONTROL support for
manipulating MetaModes, but will cause the XRandR and XF86VidMode visible
refresh rate to be accurate.


FREQUENTLY ASKED TWINVIEW QUESTIONS

Q. Nothing gets displayed on my second monitor; what is wrong?

A. Monitors that do not support monitor detection using Display Data Channel
   (DDC) protocols (this includes most older monitors) are not detectable by
   your NVIDIA card. You need to explicitly tell the NVIDIA X driver what you
   have connected using the "ConnectedMonitor" option; e.g.,
   
       Option "ConnectedMonitor" "CRT, CRT"
   
   

Q. Will window managers be able to appropriately place windows (e.g., avoiding
   placing windows across both display devices, or in inaccessible regions of
   the virtual desktop)?

A. Yes. The NVIDIA X driver provides a Xinerama extension that X clients (such
   as window managers) can use to discover the current TwinView configuration.
   Note that the Xinerama protocol provides no way to notify clients when a
   configuration change occurs, so if you modeswitch to a different MetaMode,
   your window manager will still think you have the previous configuration.
   Using the Xinerama extension, in conjunction with the XF86VidMode extension
   to get modeswitch events, window managers should be able to determine the
   TwinView configuration at any given time.

   Unfortunately, the data provided by XineramaQueryScreens() appears to
   confuse some window managers; to work around such broken window mangers,
   you can disable communication of the TwinView screen layout with the
   "NoTwinViewXineramaInfo" X config Option (see Appendix F for details).

   The order that display devices are reported in via the TwinView Xinerama
   information can be configured with the TwinViewXineramaInfoOrder X
   configuration option.

   Be aware that the NVIDIA driver cannot provide the Xinerama extension if
   the X server's own Xinerama extension is being used. Explicitly specifying
   Xinerama in the X config file or on the X server commandline will prohibit
   NVIDIA's Xinerama extension from installing, so make sure that the X
   server's log file does not contain:
   
       (++) Xinerama: enabled
   
   if you want the NVIDIA driver to be able to provide the Xinerama extension
   while in TwinView.

   Another solution is to use panning domains to eliminate inaccessible
   regions of the virtual screen (see the MetaMode description above).

   A third solution is to use two separate X screens, rather than use
   TwinView. See Chapter 12.


Q. Why can I not get a resolution of 1600x1200 on the second display device
   when using a GeForce2 MX?

A. Because the second display device on the GeForce2 MX was designed to be a
   digital flat panel, the Pixel Clock for the second display device is only
   150 MHz. This effectively limits the resolution on the second display
   device to somewhere around 1280x1024 (for a description of how Pixel Clock
   frequencies limit the programmable modes, see the XFree86 Video Timings
   HOWTO). This constraint is not present on GeForce4 or GeForce FX GPUs --
   the maximum pixel clock is the same on both heads.


Q. Do video overlays work across both display devices?

A. Hardware video overlays only work on the first display device. The current
   solution is that blitted video is used instead on TwinView.


Q. How are virtual screen dimensions determined in TwinView?

A. After all requested modes have been validated, and the offsets for each
   MetaMode's viewports have been computed, the NVIDIA driver computes the
   bounding box of the panning domains for each MetaMode. The maximum bounding
   box width and height is then found.

   Note that one side effect of this is that the virtual width and virtual
   height may come from different MetaModes. Given the following MetaMode
   string:
   
       "1600x1200,NULL; 1024x768+0+0, 1024x768+0+768"
   
   the resulting virtual screen size will be 1600 x 1536.


Q. Can I play full screen games across both display devices?

A. Yes. While the details of configuration will vary from game to game, the
   basic idea is that a MetaMode presents X with a mode whose resolution is
   the bounding box of the viewports for that MetaMode. For example, the
   following:
   
       Option "MetaModes" "1024x768,1024x768; 800x600,800x600"
       Option "TwinViewOrientation" "RightOf"
   
   produce two modes: one whose resolution is 2048x768, and another whose
   resolution is 1600x600. Games such as Quake 3 Arena use the VidMode
   extension to discover the resolutions of the modes currently available. To
   configure Quake 3 Arena to use the above MetaMode string, add the following
   to your q3config.cfg file:
   
       seta r_customaspect "1"
       seta r_customheight "600"
       seta r_customwidth  "1600"
       seta r_fullscreen   "1"
       seta r_mode         "-1"
   
   Note that, given the above configuration, there is no mode with a
   resolution of 800x600 (remember that the MetaMode "800x600, 800x600" has a
   resolution of 1600x600"), so if you change Quake 3 Arena to use a
   resolution of 800x600, it will display in the lower left corner of your
   screen, with the rest of the screen grayed out. To have single head modes
   available as well, an appropriate MetaMode string might be something like:
   
       "800x600,800x600; 1024x768,NULL; 800x600,NULL; 640x480,NULL"
   
   More precise configuration information for specific games is beyond the
   scope of this document, but the above examples coupled with numerous online
   sources should be enough to point you in the right direction.


______________________________________________________________________________

Chapter 11. Support for GLX in Xinerama
______________________________________________________________________________

The NVIDIA FreeBSD supports GLX when Xinerama is enabled on similar GPUs. The
Xinerama extension takes multiple physical X screens (possibly spanning
multiple GPUs), and binds them into one logical X screen. This allows windows
to be dragged between GPUs and to span across multiple GPUs. The NVIDIA driver
supports hardware accelerated OpenGL rendering across all NVIDIA GPUs when
Xinerama is enabled.

To configure Xinerama

  1. Configure multiple X screens (refer to the XF86Config(5x) or
     xorg.conf(5x) manpages for details).

  2. Enable Xinerama by adding the line
     
         Option "Xinerama" "True"
     
     to the "ServerFlags" section of your X config file.


Requirements:

   o Using identical GPUs is recommended. Some combinations of non-identical,
     but similar, GPUs are supported. If a GPU is incompatible with the rest
     of a Xinerama desktop then no OpenGL rendering will appear on the screens
     driven by that GPU. Rendering will still appear normally on screens
     connected to other supported GPUs. In this situation the X log file will
     include a message of the form:



(WW) NVIDIA(2): The GPU driving screen 2 is incompatible with the rest of
(WW) NVIDIA(2):      the GPUs composing the desktop.  OpenGL rendering will
(WW) NVIDIA(2):      be disabled on screen 2.



   o The NVIDIA X driver must be used for all X screens in the server.

   o Only the intersection of capabilities across all GPUs will be advertised.

     The maximum OpenGL viewport size depends on the hardware used, and is
     described by the following table. If an OpenGL window is larger than the
     maximum viewport, regions beyond the viewport will be blank.
     
         OpenGL Viewport Maximums in Xinerama
         
         GeForce GPUs before GeForce 8:      4096 x 4096 pixels
         GeForce 8 and newer GPUs:           8192 x 8192 pixels
         Quadro:                             as large as the Xinerama
                                             desktop
     
     
   o X configuration options that affect GLX operation (e.g.: stereo,
     overlays) should be set consistently across all X screens in the X
     server.


Known Issues:

   o Versions of XFree86 prior to 4.5 and versions of X.Org prior to 6.8.0
     lack the required interfaces to properly implement overlays with the
     Xinerama extension. On earlier server versions mixing overlays and
     Xinerama will result in rendering corruption. If you are using the
     Xinerama extension with overlays, it is recommended that you upgrade to
     XFree86 4.5, X.Org 6.8.0, or newer.


______________________________________________________________________________

Chapter 12. Configuring Multiple X Screens on One Card
______________________________________________________________________________

GPUs that support TwinView (Chapter 10) can also be configured to treat each
connected display device as a separate X screen.

While there are several disadvantages to this approach as compared to TwinView
(e.g.: windows cannot be dragged between X screens, hardware accelerated
OpenGL cannot span the two X screens), it does offer several advantages over
TwinView:

   o If each display device is a separate X screen, then properties that may
     vary between X screens may vary between displays (e.g.: depth, root
     window size, etc).

   o Hardware that can only be used on one display at a time (e.g.: video
     overlays, hardware accelerated RGB overlays), and which consequently
     cannot be used at all when in TwinView, can be exposed on the first X
     screen when each display is a separate X screen.

   o TwinView is a fairly new feature. X has historically used one screen per
     display device.


To configure two separate X screens to share one graphics card, here is what
you will need to do:

First, create two separate Device sections, each listing the BusID of the
graphics card to be shared and listing the driver as "nvidia", and assign each
a separate screen:

    Section "Device"
        Identifier  "nvidia0"
        Driver      "nvidia"
        # Edit the BusID with the location of your graphics card
        BusID       "PCI:2:0:0"
        Screen      0
    EndSection

    Section "Device"
        Identifier  "nvidia1"
        Driver      "nvidia"
        # Edit the BusID with the location of your graphics card
        BusId       "PCI:2:0:0"
        Screen      1
    EndSection

Then, create two Screen sections, each using one of the Device sections:

    Section "Screen"
        Identifier  "Screen0"
        Device      "nvidia0"
        Monitor     "Monitor0"
        DefaultDepth 24
        Subsection "Display"
            Depth       24
            Modes       "1600x1200" "1024x768" "800x600" "640x480" 
        EndSubsection
    EndSection

    Section "Screen"
        Identifier  "Screen1"
        Device      "nvidia1"
        Monitor     "Monitor1"
        DefaultDepth 24
        Subsection "Display"
            Depth       24
            Modes       "1600x1200" "1024x768" "800x600" "640x480" 
        EndSubsection
    EndSection

(Note: You'll also need to create a second Monitor section) Finally, update
the ServerLayout section to use and position both Screen sections:

    Section "ServerLayout"
        ...
        Screen         0 "Screen0" 
        Screen         1 "Screen1" leftOf "Screen0"
        ...
    EndSection

For further details, refer to the XF86Config(5x) or xorg.conf(5x) manpages.

______________________________________________________________________________

Chapter 13. Configuring TV-Out
______________________________________________________________________________

NVIDIA GPU-based graphics cards with a TV-Out connector can use a television
as another display device (the same way that it would use a CRT or digital
flat panel). The TV can be used by itself, or in conjunction with another
display device in a TwinView or multiple X screen configuration. If a TV is
the only display device connected to your graphics card, it will be used as
the primary display when you boot your system (i.e. the console will come up
on the TV just as if it were a CRT).

The NVIDIA X driver populates the mode pool for the TV with all the mode sizes
that the driver supports with the given TV standard and the TV encoder on the
graphics card. These modes are given names that correspond to their
resolution; e.g., "800x600".

Because these TV modes only depend on the TV encoder and the TV standard, TV
modes do not go through normal mode validation. The X configuration options
HorizSync and VertRefresh are not used for TV mode validation.

Additionally, the NVIDIA driver contains a hardcoded list of mode sizes that
it can drive for each combination of TV encoder and TV standard. Therefore,
custom modelines in your X configuration file are ignored for TVs.

To use your TV with X, there are several relevant X configuration options:

   o The Modes in the screen section of your X configuration file; you can use
     these to request any of the modes in the mode pool which the X driver
     created for this combination of TV standard and TV encoder. Examples
     include "640x480" and "800x600". If in doubt, use "nvidia-auto-select".

   o The "TVStandard" option should be added to your screen section; valid
     values are:
     
         TVStandard       Description
         -------------    --------------------------------------------------
         "PAL-B"          used in Belgium, Denmark, Finland, Germany,
                          Guinea, Hong Kong, India, Indonesia, Italy,
                          Malaysia, The Netherlands, Norway, Portugal,
                          Singapore, Spain, Sweden, and Switzerland
         "PAL-D"          used in China and North Korea
         "PAL-G"          used in Denmark, Finland, Germany, Italy,
                          Malaysia, The Netherlands, Norway, Portugal,
                          Spain, Sweden, and Switzerland
         "PAL-H"          used in Belgium
         "PAL-I"          used in Hong Kong and The United Kingdom
         "PAL-K1"         used in Guinea
         "PAL-M"          used in Brazil
         "PAL-N"          used in France, Paraguay, and Uruguay
         "PAL-NC"         used in Argentina
         "NTSC-J"         used in Japan
         "NTSC-M"         used in Canada, Chile, Colombia, Costa Rica,
                          Ecuador, Haiti, Honduras, Mexico, Panama, Puerto
                          Rico, South Korea, Taiwan, United States of
                          America, and Venezuela
         "HD480i"         480 line interlaced
         "HD480p"         480 line progressive
         "HD720p"         720 line progressive
         "HD1080i"        1080 line interlaced
         "HD1080p"        1080 line progressive
         "HD576i"         576 line interlace
         "HD576p"         576 line progressive
     
     The line in your X config file should be something like:
     
         Option "TVStandard" "NTSC-M"
     
     If you do not specify a TVStandard, or you specify an invalid value, the
     default "NTSC-M" will be used. Note: if your country is not in the above
     list, select the country closest to your location.

   o The "UseDisplayDevice" option can be used if there are multiple display
     devices connected, and you want the connected TV to be used instead of
     the connected CRTs and/or DFPs. E.g.,
     
         Option "UseDisplayDevice" "TV"
     
     Using the "UseDisplayDevice" option, rather than the "ConnectedMonitor"
     option, is recommended.

   o The "TVOutFormat" option can be used to force the output format. Without
     this option, the driver autodetects the output format. Unfortunately, it
     does not always do this correctly. The output format can be forced with
     the "TVOutFormat" option; valid values are:
     
         TVOutFormat            Description            Supported TV
                                                       standards
         -------------------    -------------------    -------------------
         "AUTOSELECT"           The driver             PAL, NTSC, HD
                                autodetects the    
                                output format      
                                (default value).   
         "COMPOSITE"            Force Composite        PAL, NTSC
                                output format      
         "SVIDEO"               Force S-Video          PAL, NTSC
                                output format      
         "COMPONENT"            Force Component        HD
                                output format, also
                                called YPrPp       
         "SCART"                Force Scart output     PAL, NTSC
                                format, also called
                                Peritel            
     
     The line in your X config file should be something like:
     
         Option "TVOutFormat" "SVIDEO"
     
     
   o The "TVOverScan" option can be used to enable Overscan, when the TV
     encoder supports it. Valid values are decimal values in the range 1.0
     (which means overscan as much as possible: make the image as large as
     possible) and 0.0 (which means disable overscanning: make the image as
     small as possible). Overscanning is disabled (0.0) by default.

The NVIDIA X driver may not restore the console correctly with XFree86
versions older than 4.3 when the console is a TV. This is due to binary
incompatibilities between XFree86 int10 modules. If you use a TV as your
console it is recommended that you upgrade to XFree86 4.3 or later.

______________________________________________________________________________

Chapter 14. The XRandR Extension
______________________________________________________________________________

X.Org version X11R6.8.1 contains support for the rotation component of the
XRandR extension, which allows screens to be rotated at 90 degree increments.

The driver supports rotation with the extension when 'Option "RandRRotation"'
is enabled in the X config file.

Workstation RGB or CI overlay visuals will function at lower performance and
the video overlay will not be available when RandRRotation is enabled.

You can query the available rotations using the 'xrandr' command line
interface to the RandR extension by running:

    xrandr -q

You can set the rotation orientation of the screen by running any of:

    xrandr -o left
    xrandr -o right
    xrandr -o inverted
    xrandr -o normal

Rotation may also be set through the nvidia-settings configuration utility in
the "Rotation Settings" panel.

TwinView and rotation can be used together, but rotation affects the entire
desktop. This means that the same rotation setting will apply to both display
devices in a TwinView pair. Note also that the "TwinViewOrientation" option
applies before rotation does. For example, if you have two screens
side-by-side and you want to rotate them, you should set "TwinViewOrientation"
to "Above" or "Below".

______________________________________________________________________________

Chapter 15. Configuring a Notebook
______________________________________________________________________________


15A. INSTALLATION AND CONFIGURATION

Installation and configuration of the NVIDIA Accelerated FreeBSD Driver Set on
a notebook is the same as for any desktop environment, with a few additions,
as described below.


15B. TWINVIEW

All mobile NVIDIA GPUs support TwinView. TwinView on a notebook can be
configured in the same way as on a desktop computer (refer to Chapter 10 );
note that in a TwinView configuration using the notebook's internal flat panel
and an external CRT, the CRT is the primary display device (specify its
HorizSync and VertRefresh in the Monitor section of your X config file) and
the flat panel is the secondary display device (specify its HorizSync and
VertRefresh through the SecondMonitorHorizSync and SecondMonitorVertRefresh
options).

The "UseEdidFreqs" X config option is enabled by default, so normally you
should not need to specify the "SecondMonitorHorizSync" and
"SecondMonitorVertRefresh" options. See the description of the UseEdidFreqs
option in Appendix F for details).


15C. HOTKEY SWITCHING OF DISPLAY DEVICES

Mobile NVIDIA GPUs also have the capacity to react to a display change hotkey
event, toggling between each of the connected display devices and each
possible combination of the connected display devices (note that only 2
display devices may be active at a time).

Hotkey switching dynamically changes the TwinView configuration; a given
hotkey event will indicate which display devices should be in use at that
time, and all MetaModes currently configured on the X screen will be updated
to use the new configuration of display devices.

Another important aspect of hotkey functionality is that you can dynamically
connect and remove display devices to/from your notebook and use the hotkey to
activate and deactivate them without restarting X.

When switching away from X to a virtual terminal, the VGA console will always
be restored to the display device on which it was present when X was started.
Similarly, when switching back into X, the same display device configuration
will be used as when you switched away, regardless of what display change
hotkey activity occurred while the virtual terminal was active.


15D. KNOWN NOTEBOOK ISSUES

There are a few known issues associated with notebooks:

   o Display change hotkey switching is not currently functioning on Toshiba
     notebooks.

   o The video overlay only works on the first display device on which you
     started X. For example, if you start X on the internal LCD, run a video
     application that uses the video overlay (uses the "Video Overlay" adapter
     advertised through the XV extension), and then hotkey switch to add a
     second display device, the video will not appear on the second display
     device. To work around this, you can either configure the video
     application to use the "Video Blitter" adapter advertised through the XV
     extension (this is always available), or hotkey switch to the display
     device on which you want to use the video overlay *before* starting X.


______________________________________________________________________________

Chapter 16. Programming Modes
______________________________________________________________________________

The NVIDIA Accelerated FreeBSD Graphics Driver supports all standard VGA and
VESA modes, as well as most user-written custom mode lines; double-scan modes
are supported on all hardware. Interlaced modes are supported on all GeForce
FX/Quadro FX and newer GPUs, and certain older GPUs; the X log file will
contain a message "Interlaced video modes are supported on this GPU" if
interlaced modes are supported.

To request one or more standard modes for use in X, you can simply add a
"Modes" line such as:

    Modes "1600x1200" "1024x768" "640x480"

in the appropriate Display subsection of your X config file (see the
XF86Config(5x) or xorg.conf(5x) man pages for details). Or, the
nvidia-xconfig(1) utility can be used to request additional modes; for
example:

    nvidia-xconfig --mode 1600x1200

See the nvidia-xconfig(1) man page for details.


16A. DEPTH, BITS PER PIXEL, AND PITCH

While not directly a concern when programming modes, the bits used per pixel
is an issue when considering the maximum programmable resolution; for this
reason, it is worthwhile to address the confusion surrounding the terms
"depth" and "bits per pixel". Depth is how many bits of data are stored per
pixel. Supported depths are 8, 15, 16, and 24. Most video hardware, however,
stores pixel data in sizes of 8, 16, or 32 bits; this is the amount of memory
allocated per pixel. When you specify your depth, X selects the bits per pixel
(bpp) size in which to store the data. Below is a table of what bpp is used
for each possible depth:

    Depth                                 BPP
    ----------------------------------    ----------------------------------
    8                                     8
    15                                    16
    16                                    16
    24                                    32

Lastly, the "pitch" is how many bytes in the linear frame buffer there are
between one pixel's data, and the data of the pixel immediately below. You can
think of this as the horizontal resolution multiplied by the bytes per pixel
(bits per pixel divided by 8). In practice, the pitch may be more than this
product due to alignment constraints.


16B. MAXIMUM RESOLUTIONS

The NVIDIA Accelerated FreeBSD Graphics Driver and NVIDIA GPU-based graphics
cards support resolutions up to 8192x8192 pixels for the GeForce 8 series and
above, and up to 4096x4096 pixels for the GeForce 7 series and below, though
the maximum resolution your system can support is also limited by the amount
of video memory (see USEFUL FORMULAS for details) and the maximum supported
resolution of your display device (monitor/flat panel/television). Also note
that while use of a video overlay does not limit the maximum resolution or
refresh rate, video memory bandwidth used by a programmed mode does affect the
overlay quality.


16C. USEFUL FORMULAS

The maximum resolution is a function both of the amount of video memory and
the bits per pixel you elect to use:

HR * VR * (bpp/8) = Video Memory Used

In other words, the amount of video memory used is equal to the horizontal
resolution (HR) multiplied by the vertical resolution (VR) multiplied by the
bytes per pixel (bits per pixel divided by eight). Technically, the video
memory used is actually the pitch times the vertical resolution, and the pitch
may be slightly greater than (HR * (bpp/8)) to accommodate the hardware
requirement that the pitch be a multiple of some value.

Note that this is just memory usage for the frame buffer; video memory is also
used by other things, such as OpenGL and pixmap caching.

Another important relationship is that between the resolution, the pixel clock
(aka dot clock) and the vertical refresh rate:

RR = PCLK / (HFL * VFL)

In other words, the refresh rate (RR) is equal to the pixel clock (PCLK)
divided by the total number of pixels: the horizontal frame length (HFL)
multiplied by the vertical frame length (VFL) (note that these are the frame
lengths, and not just the visible resolutions). As described in the XFree86
Video Timings HOWTO, the above formula can be rewritten as:

PCLK = RR * HFL * VFL

Given a maximum pixel clock, you can adjust the RR, HFL and VFL as desired, as
long as the product of the three is consistent. The pixel clock is reported in
the log file. Your X log should contain a line like this:

    (--) NVIDIA(0): ViewSonic VPD150 (DFP-1): 165 MHz maximum pixel clock

which indicates the maximum pixel clock for that display device.


16D. HOW MODES ARE VALIDATED

In traditional XFree86/X.Org mode validation, the X server takes as a starting
point the X server's internal list of VESA standard modes, plus any modes
specified with special ModeLines in the X configuration file's Monitor
section. These modes are validated against criteria such as the valid
HorizSync/VertRefresh frequency ranges for the user's monitor (as specified in
the Monitor section of the X configuration file), as well as the maximum pixel
clock of the GPU.

Once the X server has determined the set of valid modes, it takes the list of
user requested modes (i.e., the set of modes named in the "Modes" line in the
Display subsection of the Screen section of X configuration file), and finds
the "best" validated mode with the requested name.

The NVIDIA X driver uses a variation on the above approach to perform mode
validation. During X server initialization, the NVIDIA X driver builds a pool
of valid modes for each display device. It gathers all possible modes from
several sources:

   o The display device's EDID

   o The X server's built-in list

   o Any user-specified ModeLines in the X configuration file

   o The VESA standard modes

For every possible mode, the mode is run through mode validation. The core of
mode validation is still performed similarly to traditional XFree86/X.Org mode
validation: the mode timings are checked against things such as the valid
HorizSync and VertRefresh ranges and the maximum pixelclock. Note that each
individual stage of mode validation can be independently controlled through
the "ModeValidation" X configuration option.

Invalid modes are discarded; valid modes are inserted into the mode pool. See
MODE VALIDATION REPORTING for how to get more details on mode validation
results for each considered mode.

Valid modes are given a unique name that is guaranteed to be unique across the
whole mode pool for this display device. This mode name is constructed
approximately like this:

    <width>x<height>_<refreshrate>

(e.g., "1600x1200_85")

The name may also be prepended with another number to ensure the mode is
unique; e.g., "1600x1200_85_0".

As validated modes are inserted into the mode pool, duplicate modes are
removed, and the mode pool is sorted, such that the "best" modes are at the
beginning of the mode pool. The sorting is based roughly on:

   o Resolution

   o Source (EDID-provided modes are prioritized higher than VESA-provided
     modes, which are prioritized higher than modes that were in the X
     server's built-in list)

   o Refresh rate

Once modes from all mode sources are validated and the mode pool is
constructed, all modes with the same resolution are compared; the best mode
with that resolution is added to the mode pool a second time, using just the
resolution as its unique modename (e.g., "1600x1200"). In this way, when you
request a mode using the traditional names (e.g., "1600x1200"), you still get
what you got before (the 'best' 1600x1200 mode); the added benefit is that all
modes in the mode pool can be addressed by a unique name.

When verbose logging is enabled (see the FAQ section on increasing the amount
of data printed in the X log file), the mode pool for each display device is
printed to the X log file.

After the mode pool is built for all display devices, the requested modes (as
specified in the X configuration file), are looked up from the mode pool. Each
requested mode that can be matched against a mode in the mode pool is then
advertised to the X server and is available to the user through the X server's
mode switching hotkeys (ctrl-alt-plus/minus) and the XRandR and XF86VidMode X
extensions.

If only one display device is in use by the X screen when the X server starts,
all modes in the mode pool are implicitly made available to the X server. See
the "IncludeImplicitMetaModes" X configuration option in Appendix F for
details.


16E. THE NVIDIA-AUTO-SELECT MODE

You can request a special mode by name in the X config file, named
"nvidia-auto-select". When the X driver builds the mode pool for a display
device, it selects one of the modes as the "nvidia-auto-select" mode; a new
entry is made in the mode pool, and "nvidia-auto-select" is used as the unique
name for the mode.

The "nvidia-auto-select" mode is intended to be a reasonable mode for the
display device in question. For example, the "nvidia-auto-select" mode is
normally the native resolution for flatpanels, as reported by the flatpanel's
EDID, or one of the detailed timings from the EDID. The "nvidia-auto-select"
mode is guaranteed to always be present, and to always be defined as something
considered valid by the X driver for this display device.

Note that the "nvidia-auto-select" mode is not necessarily the largest
possible resolution, nor is it necessarily the mode with the highest refresh
rate. Rather, the "nvidia-auto-select" mode is selected such that it is a
reasonable default. The selection process is roughly:


   o If the EDID for the display device reported a preferred mode timing, and
     that mode timing is considered a valid mode, then that mode is used as
     the "nvidia-auto-select" mode. You can check if the EDID reported a
     preferred timing by starting X with logverbosity greater than or equal to
     5 (see the FAQ section on increasing the amount of data printed in the X
     log file), and looking at the EDID printout; if the EDID contains a line:
     
         Prefer first detailed timing : Yes
     
     Then the first mode listed under the "Detailed Timings" in the EDID will
     be used.

   o If the EDID did not provide a preferred timing, the best detailed timing
     from the EDID is used as the "nvidia-auto-select" mode.

   o If the EDID did not provide any detailed timings (or there was no EDID at
     all), the best valid mode not larger than 1024x768 is used as the
     "nvidia-auto-select" mode. The 1024x768 limit is imposed here to restrict
     use of modes that may have been validated, but may be too large to be
     considered a reasonable default, such as 2048x1536.

   o If all else fails, the X driver will use a built-in 800 x 600 60Hz mode
     as the "nvidia-auto-select" mode.


If no modes are requested in the X configuration file, or none of the
requested modes can be found in the mode pool, then the X driver falls back to
the "nvidia-auto-select" mode, so that X can always start. Appropriate warning
messages will be printed to the X log file in these fallback scenarios.

You can add the "nvidia-auto-select" mode to your X configuration file by
running the command

    nvidia-xconfig --mode nvidia-auto-select

and restarting your X server.

The X driver can generally do a much better job of selecting the
"nvidia-auto-select" mode if the display device's EDID is available. This is
one reason why the "IgnoreEDID" X configuration option has been deprecated,
and that it is recommended to only use the "UseEDID" X configuration option
sparingly. Note that, rather than globally disable all uses of the EDID with
the "UseEDID" option, you can individually disable each particular use of the
EDID using the "UseEDIDFreqs", "UseEDIDDpi", and/or the "NoEDIDModes" argument
in the "ModeValidation" X configuration option.


16F. MODE VALIDATION REPORTING

When log verbosity is set to 6 or higher (see FAQ
section on increasing the amount of data printed in the X log file), the X log
will record every mode that is considered for each display device's mode pool,
and report whether the mode passed or failed. For modes that were considered
invalid, the log will report why the mode was considered invalid.


16G. ENSURING IDENTICAL MODE TIMINGS

Some functionality, such as Active Stereo with TwinView, requires control over
exactly which mode timings are used. For explicit control over which mode
timings are used on each display device, you can specify the ModeLine you want
to use (using one of the ModeLine generators available), and using a unique
name. For example, if you wanted to use 1024x768 at 120 Hz on each monitor in
TwinView with active stereo, you might add something like this to the monitor
section of your X configuration file:

    # 1024x768 @ 120.00 Hz (GTF) hsync: 98.76 kHz; pclk: 139.05 MHz
    Modeline "1024x768_120"  139.05  1024 1104 1216 1408  768 769 772 823
-HSync +Vsync

Then, in the Screen section of your X config file, specify a MetaMode like
this:

    Option "MetaModes" "1024x768_120, 1024x768_120"



16H. ADDITIONAL INFORMATION

An XFree86 ModeLine generator, conforming to the GTF Standard is available at
http://gtf.sourceforge.net/. Additional generators can be found by searching
for "modeline" on freshmeat.net.

______________________________________________________________________________

Chapter 17. Flipping and UBB
______________________________________________________________________________

The NVIDIA Accelerated FreeBSD Graphics Driver supports Unified Back Buffer
(UBB) and OpenGL Flipping. These features can provide performance gains in
certain situations.

   o Unified Back Buffer (UBB): UBB is available only on the Quadro family of
     GPUs (Quadro4 NVS excluded) and is enabled by default when there is
     sufficient video memory available. This can be disabled with the UBB X
     config option described in Appendix F. When UBB is enabled, all windows
     share the same back, stencil and depth buffers. When there are many
     windows, the back, stencil and depth usage will never exceed the size of
     that used by a full screen window. However, even for a single small
     window, the back, stencil, and depth video memory usage is that of a full
     screen window. In that case video memory may be used less efficiently
     than in the non-UBB case.

   o Flipping: When OpenGL flipping is enabled, OpenGL can perform buffer
     swaps by changing which buffer the DAC scans out rather than copying the
     back buffer contents to the front buffer; this is generally a much higher
     performance mechanism and allows tearless swapping during the vertical
     retrace (when __GL_SYNC_TO_VBLANK is set). The conditions under which
     OpenGL can flip are slightly complicated, but in general: on GeForce or
     newer hardware, OpenGL can flip when a single full screen unobscured
     OpenGL application is running, and __GL_SYNC_TO_VBLANK is enabled.
     Additionally, OpenGL can flip on Quadro hardware even when an OpenGL
     window is partially obscured or not full screen or __GL_SYNC_TO_VBLANK is
     not enabled.


______________________________________________________________________________

Appendix C. The Sysctl Interface
______________________________________________________________________________

The sysctl interface allows you to obtain run-time information about the
driver, any installed NVIDIA graphics cards and the AGP status. It also allows
you to control low-level configuration options and/or overrides.

The various pieces of information are held in a hierarchy under hw.nvidia and
are accessible with the sysctl(8) command.

NVIDIA sysctl Entries

hw.nvidia.version

    Prints the installed driver revision

hw.nvidia.cards.n.*

    These OIDs provide information about NVIDIA device 'n':
    
        ID                                  Description
        --------------------------------    --------------------------------
        model                               the device's product name
        irq                                 the IRQ claimed by this device
        vbios                               the device's VBIOS revision
        type                                the bus type of this device
    
    
hw.nvidia.agp.host-bridge.*
hw.nvidia.agp.card.*

    These OIDs provide information about the AGP capabilities of the installed
    AGP graphics card and host-bridge respectively. These values are most
    likely to be correct after system boot and before the X server is started
    (and the AGP subsystem intialized).
    
        ID                Description
        --------------    ---------------------------------------------------
        rates             the AGP rates supported by this device
        fw                if the device suppoprts AGP fast-writes
        sba               if the device supports AGP side-band-addressing
        registers         the device's AGP registers, status:command
    
    
hw.nvidia.agp.status.*

    Prints AGP status information based on the AGP command registers of the
    host-bridge and of the AGP card.
    
        ID                Description
        --------------    ---------------------------------------------------
        status            if AGP is enabled or disabled
        driver            which driver is being used
        rate              the programmed AGP rate
        fw                if fast-writes are enabled or disabled
        sba               if side-band-addressing is enabled or disabled
    
    
hw.nvidia.registry.*

    Low-level kernel module configuration options. Changing these is typically
    not necessary and potentially dangerous. If you do need to change any of
    these options, you will need to do so BEFORE you start the X server.
    
        ID                Description
        --------------    ---------------------------------------------------
        status            if AGP is enabled or disabled
        driver            which driver is being used
        rate              the programmed AGP rate
        fw                if fast-writes are enabled or disabled
        sba               if side-band-addressing is enabled or disabled
    
    

______________________________________________________________________________

Appendix D. Configuring Low-level Parameters
______________________________________________________________________________

The NVIDIA resource manager recognizes several low-level configuration
parameters that can be set using the sysctl driver interface BEFORE the X
server is started. Normally you should not need to modify any of these
parameters, but it is sometimes necessary or desirable to do so.

To view the current settings of these parameters, you need to issue this
sysctl command ('nvidia.ko' needs to be loaded):

    % sysctl -a hw.nvidia.registry

To change any of the parameters, you need to pass the complete name of the OID
followed by '=' and the new value, e.g.:

    % sysctl hw.nvidia.registry.EnableVia4x=1

It is possible to automate setting these paramaters by adding them to the
'/etc/sysctl.conf' file. See `man 5 sysctl.conf` for details.

The following parameters are recognized by 'nvidia.ko':

Resource Manager Parameters

VideoMemoryTypeOverride

    We normally detect memory type on TNT cards by scanning the embedded BIOS.
    Unfortunately, we've seen some cases where a TNT card has been flashed
    with the wrong bios. For example, an SDRAM based TNT has been flashed with
    an SGRAM bios, and therefore claims to be an SGRAM TNT. We've therefore
    provided an override here. Make sure to set the value toe the type of
    memory used on your card.
    
        Value                               Meaning
        --------------------------------    --------------------------------
        1                                   SDRAM
        2                                   SGRAM
    
    Note that we can only do so much here. There are border cases where even
    this fails. For example, if 2 TNT cards are in the same system, one SGRAM,
    one SDRAM.

    This option is disabled by default, see below for information on how to
    enable it.

EnableVia4x

    We've had problems with some Via chipsets in 4x mode, we need force them
    back down to 2x mode. If you'd like to experiment with retaining 4x mode,
    you may try setting this value to 1 If that hangs the system, you're stuck
    with 2x mode; there's nothing we can do about it.
    
        Value             Meaning
        --------------    ---------------------------------------------------
        0                 disable AGP 4x on Via chipsets (default)
        1                 enable AGP 4x on Via chipsets
    
    
EnableALiAGP

    Some ALi chipsets (ALi1541, ALi1647) are known to cause severe system
    stability problems with AGP enabled. To avoid lockups, we disable AGP on
    systems with these chipsets by default. It appears that updating the
    system BIOS and using recent versions of the kernel AGP Gart driver can
    make such systems much more stable. If you own a system with one of the
    aforementioned chipsets and had it working reasonably well previously, or
    if you want to experiment with BIOS and AGPGART revisions, you can
    re-enable AGP support by setting this option to 1.
    
        Value             Meaning
        --------------    ---------------------------------------------------
        0                 disable AGP on Ali1541 and ALi1647 (default)
        1                 enable AGP on Ali1541 and ALi1647
    
    
NvAGP

    This options controls which AGP GART driver is used when no explicit
    request is made to change the default (X server).
    
        Value             Meaning
        --------------    ---------------------------------------------------
        0                 disable AGP support
        1                 use the NVIDIA builtin driver (if possible)
        2                 use the kernel's AGPGART driver (if possible)
        3                 use any available driver (try 2, then 1)
    
    Note that the NVIDIA internal AGP GART driver will not be used if AGPGART
    was either statically linked into your kernel or built as a kernel module
    and loaded before the NVIDIA kernel module.

ReqAGPRate

    Normally, the driver will compare speed modes of the chipset and the card,
    picking the highest common rate. This key forces a maximum limit, to limit
    the driver to lower speeds. The driver will not attempt a speed beyond
    what the chipset and card claim they are capable of.

    Make sure you really know what you're doing before you enable this
    override. By default, AGP drivers will enable the fastest AGP rate your
    card and motherboard chipset are capable of. Then, in some cases, our
    driver will force this rate down to work around bugs in both our chipsets,
    and motherboard chipsets. Using this variable will override our bug fixes.
    This may be desirable in some cases, but not most. THIS IS COMPLETELY
    UNSUPPORTED!

    This option expects a bitmask (7 = 1|2|3|4, 3=1|2, etc.)

    This option is disabled by default, see below for information on how to
    enable it.

EnableAGPSBA

    For stability reasons, the driver will not Side Band Addressing even if
    both the host chipset and the AGP card support it. You may override this
    behaviour with the following registry key. THIS IS COMPLETELY UNSUPPORTED!
    
    
        Value             Meaning
        --------------    ---------------------------------------------------
        0                 disable Side Band Addressing (default on x86, see
                          below)
        1                 enable Side Band Addressing (if supported)
    
    
EnableAGPFW

    Similar to Side Band Addressing, Fast Writes are disabled by default. If
    you wish to enable them on systems that support them, you can do so with
    this registry key. Note that this may render your system unstable with
    many AGP chipsets. THIS IS COMPLETELY UNSUPPORTED! 
    
        Value                               Meaning
        --------------------------------    --------------------------------
        0                                   disable Fast Writes (default)
        1                                   enable Fast Writes
    
    

______________________________________________________________________________

Chapter 18. The X Composite Extension
______________________________________________________________________________

X.Org X servers, beginning with X11R6.8.0, contain experimental support for a
new X protocol extension called Composite. This extension allows windows to be
drawn into pixmaps instead of directly onto the screen. In conjunction with
the Damage and Render extensions, this allows a program called a composite
manager to blend windows together to draw the screen.

Performance will be degraded significantly if the "RenderAccel" option is
disabled in xorg.conf. See Appendix F for more details.

When the NVIDIA X driver is used with an X.Org X server X11R6.9.0 or newer and
the Composite extension is enabled, NVIDIA's OpenGL implementation interacts
properly with the Damage and Composite X extensions. This means that OpenGL
rendering is drawn into offscreen pixmaps and the X server is notified of the
Damage event when OpenGL renders to the pixmap. This allows OpenGL
applications to behave properly in a composited X desktop.

If the Composite extension is enabled on an X server older than X11R6.9.0,
then GLX will be disabled. You can force GLX on while Composite is enabled on
pre-X11R6.9.0 X servers with the "AllowGLXWithComposite" X configuration
option. However, GLX will not render correctly in this environment. Upgrading
your X server to X11R6.9.0 or newer is recommended.

You can enable the Composite X extension by running 'nvidia-xconfig
--composite'. Composite can be disabled with 'nvidia-xconfig --no-composite'.
See the nvidia-xconfig(1) man page for details.

If you are using Composite with GLX, it is recommended that you also enable
the "DamageEvents" X option for enhanced performance. If you are using an
OpenGL-based composite manager, you may also need the "DisableGLXRootClipping"
option to obtain proper output.

The Composite extension also causes problems with other driver components:

   o In X servers prior to X.Org 7.1, Xv cannot draw into pixmaps that have
     been redirected offscreen and will draw directly onto the screen instead.
     For some programs you can work around this issue by using an alternative
     video driver. For example, "mplayer -vo x11" will work correctly, as will
     "xine -V xshm". If you must use Xv with an older server, you can also
     disable the compositing manager and re-enable it when you are finished.

     On X.Org 7.1 and higher, the driver will properly redirect video into
     offscreen pixmaps. Note that the Xv adaptors will ignore the
     sync-to-vblank option when drawing into a redirected window.

   o Workstation overlays, stereo visuals, and the unified back buffer (UBB)
     are incompatible with Composite. These features will be automatically
     disabled when Composite is detected.


This NVIDIA FreeBSD supports OpenGL rendering to 32-bit ARGB windows on X.Org
7.2 and higher or when the "AddARGBGLXVisuals" X config file option is
enabled. If you are an application developer, you can use these new visuals in
conjunction with a composite manager to create translucent OpenGL
applications:

    int attrib[] = {
        GLX_RENDER_TYPE, GLX_RGBA_BIT,
        GLX_DRAWABLE_TYPE, GLX_WINDOW_BIT,
        GLX_RED_SIZE, 1,
        GLX_GREEN_SIZE, 1,
        GLX_BLUE_SIZE, 1,
        GLX_ALPHA_SIZE, 1,
        GLX_DOUBLEBUFFER, True,
        GLX_DEPTH_SIZE, 1,
        None };
    GLXFBConfig *fbconfigs, fbconfig;
    int numfbconfigs, render_event_base, render_error_base;
    XVisualInfo *visinfo;
    XRenderPictFormat *pictFormat;

    /* Make sure we have the RENDER extension */
    if(!XRenderQueryExtension(dpy, &render_event_base, &render_error_base)) {
        fprintf(stderr, "No RENDER extension found\n");
        exit(EXIT_FAILURE);
    }

    /* Get the list of FBConfigs that match our criteria */
    fbconfigs = glXChooseFBConfig(dpy, scrnum, attrib, &numfbconfigs);
    if (!fbconfigs) {
        /* None matched */
        exit(EXIT_FAILURE);
    }

    /* Find an FBConfig with a visual that has a RENDER picture format that
     * has alpha */
    for (i = 0; i < numfbconfigs; i++) {
        visinfo = glXGetVisualFromFBConfig(dpy, fbconfigs[i]);
        if (!visinfo) continue;
        pictFormat = XRenderFindVisualFormat(dpy, visinfo->visual);
        if (!pictFormat) continue;

        if(pictFormat->direct.alphaMask > 0) {
            fbconfig = fbconfigs[i];
            break;
        }

        XFree(visinfo);
    }

    if (i == numfbconfigs) {
        /* None of the FBConfigs have alpha.  Use a normal (opaque)
         * FBConfig instead */
        fbconfig = fbconfigs[0];
        visinfo = glXGetVisualFromFBConfig(dpy, fbconfig);
        pictFormat = XRenderFindVisualFormat(dpy, visinfo->visual);
    }

    XFree(fbconfigs);


When rendering to a 32-bit window, keep in mind that the X RENDER extension,
used by most composite managers, expects "premultiplied alpha" colors. This
means that if your color has components (r,g,b) and alpha value a, then you
must render (a*r, a*g, a*b, a) into the target window.

More information about Composite can be found at
http://freedesktop.org/Software/CompositeExt

______________________________________________________________________________

Chapter 19. The nvidia-settings Utility
______________________________________________________________________________

A graphical configuration utility, 'nvidia-settings', is included with the
NVIDIA FreeBSD graphics driver. After installing the driver and starting X,
you can run this configuration utility by running:

    % nvidia-settings

in a terminal window.

Detailed information about the configuration options available are documented
in the help window in the utility.

For more information, see the nvidia-settings man page or the user guide
available here:
ftp://download.nvidia.com/XFree86/Linux-x86/nvidia-settings-user-guide.txt

The source code to nvidia-settings is released as GPL and is available here:
ftp://download.nvidia.com/XFree86/nvidia-settings/

If you have trouble running the nvidia-settings binary shipped with the NVIDIA
FreeBSD Graphics Driver, refer to the nvidia-settings entry in Chapter 6.

______________________________________________________________________________

Chapter 20. SLI and Multi-GPU FrameRendering
______________________________________________________________________________

The NVIDIA FreeBSD driver contains support for NVIDIA SLI FrameRendering and
NVIDIA Multi-GPU FrameRendering. Both of these technologies allow an OpenGL
application to take advantage of multiple GPUs to improve visual performance.

The distinction between SLI and Multi-GPU is straightforward. SLI is used to
leverage the processing power of GPUs across two or more graphics cards, while
Multi-GPU is used to leverage the processing power of two GPUs colocated on
the same graphics card. If you want to link together separate graphics cards,
you should use the "SLI" X config option. Likewise, if you want to link
together GPUs on the same graphics card, you should use the "MultiGPU" X
config option. If you have two cards, each with two GPUs, and you wish to link
them all together, you should use the "SLI" option.

In FreeBSD, with two GPUs SLI and Multi-GPU can both operate in one of three
modes: Alternate Frame Rendering (AFR), Split Frame Rendering (SFR), and
Antialiasing (AA). When AFR mode is active, one GPU draws the next frame while
the other one works on the frame after that. In SFR mode, each frame is split
horizontally into two pieces, with one GPU rendering each piece. The split
line is adjusted to balance the load between the two GPUs. AA mode splits
antialiasing work between the two GPUs. Both GPUs work on the same scene and
the result is blended together to produce the final frame. This mode is useful
for applications that spend most of their time processing with the CPU and
cannot benefit from AFR.

With four GPUs, the same options are applicable. AFR mode cycles through all
four GPUs, each GPU rendering a frame in turn. SFR mode splits the frame
horizontally into four pieces. AA mode splits the work between the four GPUs,
allowing antialiasing up to 64x. With four GPUs SLI can also operate in an
additional mode, Alternate Frame Rendering of Antialiasing. (AFR of AA). With
AFR of AA, pairs of GPUs render alternate frames, each GPU in a pair doing
half of the antialiasing work. Note that these scenarios apply whether you
have four separate cards or you have two cards, each with two GPUs.

Multi-GPU is enabled by setting the "MultiGPU" option in the X configuration
file; see Appendix F for details about the "MultiGPU" option.

The nvidia-xconfig utility can be used to set the "MultiGPU" option, rather
than modifying the X configuration file by hand. For example:

    % nvidia-xconfig --multigpu=on


SLI is enabled by setting the "SLI" option in the X configuration file; see
Appendix F for details about the SLI option.

The nvidia-xconfig utility can be used to set the SLI option, rather than
modifying the X configuration file by hand. For example:

    % nvidia-xconfig --sli=on



20A. HARDWARE REQUIREMENTS

SLI functionality requires:

   o Identical PCI-Express graphics cards

   o A supported motherboard

   o In most cases, a video bridge connecting the two graphics cards

For the latest in supported SLI and Multi-GPU configurations, including SLI-
and Multi-GPU capable GPUs and SLI-capable motherboards, see
http://www.slizone.com.


20B. OTHER NOTES AND REQUIREMENTS

The following other requirements apply to SLI and Multi-GPU:

   o Mobile GPUs are NOT supported

   o SLI on Quadro-based graphics cards always requires a video bridge

   o TwinView is also not supported with SLI or Multi-GPU. Only one display
     can be used when SLI or Multi-GPU is enabled.

   o If X is configured to use multiple screens and screen 0 has SLI or
     Multi-GPU enabled, the other screens will be disabled. Note that if SLI
     or Multi-GPU is enabled, the GPUs used by that configuration will be
     unavailable for single GPU rendering.



FREQUENTLY ASKED SLI AND MULTI-GPU QUESTIONS

Q. Why is glxgears slower when SLI or Multi-GPU is enabled?

A. When SLI or Multi-GPU is enabled, the NVIDIA driver must coordinate the
   operations of all GPUs when each new frame is swapped (made visible). For
   most applications, this GPU synchronization overhead is negligible.
   However, because glxgears renders so many frames per second, the GPU
   synchronization overhead consumes a significant portion of the total time,
   and the framerate is reduced.


Q. Why is Doom 3 slower when SLI or Multi-GPU is enabled?

A. The NVIDIA Accelerated FreeBSD Graphics Driver does not automatically
   detect the optimal SLI or Multi-GPU settings for games such as Doom 3 and
   Quake 4. To work around this issue, the environment variable __GL_DOOM3 can
   be set to tell OpenGL that Doom 3's optimal settings should be used. In
   Bash, this can be done in the same command that launches Doom 3 so the
   environment variable does not remain set for other OpenGL applications
   started in the same session:
   
       % __GL_DOOM3=1 doom3
   
   Doom 3's startup script can also be modified to set this environment
   variable:
   
       #!/bin/sh
       # Needed to make symlinks/shortcuts work.
       # the binaries must run with correct working directory
       cd "/usr/local/games/doom3/"
       export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:.
       export __GL_DOOM3=1
       exec ./doom.x86 "$@"
   
   This environment variable is temporary and will be removed in the future.


______________________________________________________________________________

Chapter 21. Frame Lock and Genlock
______________________________________________________________________________

NOTE: Frame Lock and Genlock features are supported only on specific hardware,
as noted below.

Visual computing applications that involve multiple displays, or even multiple
windows within a display, can require special signal processing and
application controls in order to function properly. For example, in order to
produce quality video recording of animated graphics, the graphics display
must be synchronized with the video camera. As another example, applications
presented on multiple displays must be synchronized in order to complete the
illusion of a larger, virtual canvas.

This synchronization is enabled through the frame lock and genlock
capabilities of the NVIDIA driver. This section describes the setup and use of
frame lock and genlock.


21A. DEFINITION OF TERMS

GENLOCK: Genlock refers to the process of synchronizing the pixel scanning of
one or more displays to an external synchronization source. NVIDIA Genlock
requires the external signal to be either TTL or composite, such as used for
NTSC, PAL, or HDTV. It should be noted that the NVIDIA Genlock implementation
is guaranteed only to be frame-synchronized, and not necessarily
pixel-synchronized.

FRAME LOCK: Frame Lock involves the use of hardware to synchronize the frames
on each display in a connected system. When graphics and video are displayed
across multiple monitors, frame locked systems help maintain image continuity
to create a virtual canvas. Frame lock is especially critical for stereo
viewing, where the left and right fields must be in sync across all displays.

In short, to enable genlock means to sync to an external signal. To enable
frame lock means to sync 2 or more display devices to a signal generated
internally by the hardware, and to use both means to sync 2 or more display
devices to an external signal.

SWAP SYNC: Swap sync refers to the synchronization of buffer swaps of multiple
application windows. By means of swap sync, applications running on multiple
systems can synchronize the application buffer swaps between all the systems.
In order to work across multiple systems, swap sync requires that the systems
are frame locked.

G-SYNC DEVICE: A G-Sync Device refers to devices capable of Frame
lock/Genlock. This can be a graphics card (Quadro FX 3000G) or a stand alone
device (Quadro FX G-Sync). See "Supported Hardware" below.


21B. SUPPORTED HARDWARE

Frame lock and genlock are supported for the following hardware:

    Card
    ----------------------------------------------------------------------
    Quadro FX 3000G
    Quadro FX G-Sync, used in conjunction with a Quadro FX 4400, Quadro FX
    4500, or Quadro FX 5500



21C. HARDWARE SETUP

Before you begin, you should check that your hardware has been properly
installed. If you are using the Quadro FX 3000G, the genlock/frame lock signal
processing hardware is located on the dual-slot card itself, and after
installing the card, no additional setup is necessary.

If you are using the Quadro FX G-Sync card in conjunction with a graphics
card, the following additional setup steps are required. These steps must be
performed when the system is off.

  1. On the Quadro FX G-Sync card, locate the fourteen-pin connector labeled
     "primary". If the associated ribbon cable is not already joined to this
     connector, do so now. If you plan to use frame lock or genlock in
     conjunction with SLI FrameRendering or Multi-GPU FrameRendering (see
     Chapter 20) or other multi-GPU configurations, you should connect the
     fourteen-pin connector labeled "secondary" to the second GPU. A section
     at the end of this appendix describes restrictions on such setups.

  2. Install the Quadro FX G-Sync card in any available slot. Note that the
     slot itself is only used for support, so even a known "bad" slot is
     acceptable. The slot must be close enough to the graphics card that the
     ribbon cable can reach.

  3. Connect the other end of the ribbon cable to the fourteen-pin connector
     on the graphics card.

You may now boot the system and begin the software setup of genlock and/or
frame lock. These instructions assume that you have already successfully
installed the NVIDIA Accelerated FreeBSD Driver Set. If you have not done so,
see Chapter 2.


21D. CONFIGURATION WITH NVIDIA-SETTINGS GUI

Frame lock and genlock are configured through the nvidia-settings utility. See
the 'nvidia-settings(1)' man page, and the nvidia-settings online help (click
the "Help" button in the lower right corner of the interface for per-page help
information).

From the nvidia-settings frame lock panel, you may control the addition of
G-Sync (and display) devices to the frame lock/genlock group, monitor the
status of that group, and enable/disable frame lock and genlock.

After the system has booted and X Windows has been started, run
nvidia-settings as

    % nvidia-settings

You may wish to start this utility before continuing, as we refer to it
frequently in the subsequent discussion.

The setup of genlock and frame lock are described separately. We then describe
the use of genlock and frame lock together.


21E. GENLOCK SETUP

After the system has been booted, connect the external signal to the house
sync connector (the BNC connector) on either the graphics card or the G-Sync
card. There is a status LED next to the connector. A solid red LED indicates
that the hardware cannot detect the timing signal. A green LED indicates that
the hardware is detecting a timing signal. An occasional red flash is okay.
The G-Sync device (graphics card or G-Sync card) will need to be configured
correctly for the signal to be detected.

In the frame lock panel of the nvidia-settings interface, add the X Server
that contains the display and G-Sync devices that you would like to sync to
this external source by clicking the "Add Devices..." button. An X Server is
typically specified in the format "system:m", e.g.:

    mycomputer.domain.com:0

or

    localhost:0

After adding an X Server, rows will appear in the "G-Sync Devices" section on
the frame lock panel that displays relevant status information about the
G-Sync devices, GPUs attached to those G-Sync devices and the display devices
driven by those GPUs. In particular, the G-Sync rows will display the server
name and G-Sync device number along with "Receiving" LED, "Rate", "House" LED,
"Port0"/"Port1" Images, and "Delay" information. The GPU rows will display the
GPU product name information along with the GPU ID for the server. The Display
Device rows will show the display device name and device type along with
server/client checkboxes, refresh rate, "Timing" LED and "Stereo" LED.

Once the G-Sync and display devices have been added to the frame lock/genlock
group, a Server display device will need to be selected. This is done by
selecting the "Server" checkbox of the desired display device.

If you are using a G-Sync card, you must also click the "Use House Sync if
Present" checkbox. To enable synchronization of this G-Sync device to the
external source, click the "Enable Frame Lock" button. The display device(s)
may take a moment to stabilize. If it does not stabilize, you may have
selected a synchronization signal that the system cannot support. You should
disable synchronization by clicking the "Disable Frame Lock" button and check
the external sync signal.

Modifications to genlock settings (e.g., "Use House Sync if Present", "Add
Devices...") must be done while synchronization is disabled.


21F. FRAME LOCK SETUP

Frame Lock is supported across an arbitrary number of Quadro FX 3000 or Quadro
FX G-Sync systems, although mixing the two in the same frame lock group is not
supported. Additionally, each system to be included in the frame lock group
must be configured with identical mode timings. See Chapter 16 for information
on mode timings.

Connect the systems through their RJ45 ports using standard CAT5 patch cables.
These ports are located on the frame lock card itself (either the Quadro FX
3000 or the Quadro FX G-Sync card). DO NOT CONNECT A FRAME LOCK PORT TO AN
ETHERNET CARD OR HUB. DOING SO MAY PERMANENTLY DAMAGE THE HARDWARE. The
connections should be made in a daisy-chain fashion: each card has two RJ45
ports, call them 1 and 2. Connect port 1 of system A to port 2 of system B,
connect port 1 of system B to port 2 of system C, etc. Note that you will
always have two empty ports in your frame lock group.

The ports self-configure as inputs or outputs once frame lock is enabled. Each
port has a yellow and a green LED that reflect this state. A flashing yellow
LED indicates an output and a flashing green LED indicates an input. A solid
green LED indicates that the port has not yet configured.

In the frame lock panel of the nvidia-settings interface, add the X server
that contains the display devices that you would like to include in the frame
lock group by clicking the "Add Devices..." button (see the description for
adding display devices in the previous section on GENLOCK SETUP. Like the
genlock status indicators, the "Port0" and "Port1" columns in the table on the
frame lock panel contain indicators whose states mirror the states of the
physical LEDs on the RJ45 ports. Thus, you may monitor the status of these
ports from the software interface.

Any X Server can be added to the frame lock group, provided that

  1. The system supporting the X Server is configured to support frame lock
     and is connected via RJ45 cable to the other systems in the frame lock
     group.

  2. The system driving nvidia-settings can locate and has display privileges
     on the X server that is to be included for frame lock.

A system can gain display privileges on a remote system by executing

    % xhost +

on the remote system. See the xhost(1) man page for details. Typically, frame
lock is controlled through one of the systems that will be included in the
frame lock group. While this is not a requirement, note that nvidia-settings
will only display the frame lock panel when running on an X server that
supports frame lock.

To enable synchronization on these display devices, click the "Enable Frame
Lock" button. The screens may take a moment to stabilize. If they do not
stabilize, you may have selected mode timings that one or more of the systems
cannot support. In this case you should disable synchronization by clicking
the "Disable Frame Lock" button and refer to Chapter 16 for information on
mode timings.

Modifications to frame lock settings (e.g. "Add/Remove Devices...") must be
done while synchronization is disabled.


21G. FRAME LOCK + GENLOCK

The use of frame lock and genlock together is a simple extension of the above
instructions for using them separately. You should first follow the
instructions for Frame Lock Setup, and then to one of the systems that will be
included in the frame lock group, attach an external sync source. In order to
sync the frame lock group to this single external source, you must select a
display device driven by the GPU connected to the G-Sync card (through the
primary connector) that is connected to the external source to be the signal
server for the group. This is done by selecting the checkbox labeled "Server"
of the tree on the frame lock panel in nvidia-settings. If you are using a
G-Sync based frame lock group, you must also select the "Use House Sync if
Present" checkbox. Enable synchronization by clicking the "Enable Frame Lock"
button. As with other frame lock/genlock controls, you must select the signal
server while synchronization is disabled.


21H. CONFIGURATION WITH NVIDIA-SETTINGS COMMAND LINE

Frame Lock may also be configured through the nvidia-settings command line.
This method of configuring Frame Lock may be useful in a scripted environment
to automate the setup process. (Note that the examples listed below depend on
the actual hardware configuration and as such may not work as-is.)

To properly configure Frame Lock, the following steps should be completed:

  1. Make sure Frame Lock Sync is disabled on all GPUs.

  2. Make sure all display devices that are to be frame locked have the same
     refresh rate.

  3. Configure which (display/GPU) device should be the master.

  4. Configure house sync (if applicable).

  5. Configure the slave display devices.

  6. Enable frame lock sync on the master GPU.

  7. Enable frame lock sync on the slave GPUs.

  8. Toggle the test signal on the master GPU (for testing the hardware
     connectivity.)


For a full list of the nvidia-settings Frame Lock attributes, please see the
'nvidia-settings(1)' man page. Examples:

  1. 1 System, 1 Frame Lock board, 1 GPU, and 1 display device syncing to the
     house signal:
     
       # - Make sure frame lock sync is disabled
       nvidia-settings -a [gpu:0]/FrameLockEnable=0
       nvidia-settings -q [gpu:0]/FrameLockEnable
     
       # - Query the enabled displays on the gpu
       nvidia-settings -q [gpu:0]/EnabledDisplays
     
       # - Check that the refresh rate is the one we want
       nvidia-settings -q [gpu:0]/RefreshRate
     
       # - Set the master display device to CRT-0.  The desired display
       #   device(s) to be set are passed in as a hexadecimal number
       #   in which specific bits denote which display devices to set.
       #   examples:
       #
       #   0x00000001 - CRT-0
       #   0x00000002 - CRT-1
       #   0x00000003 - CRT-0 and CRT-1
       #
       #   0x00000100 - TV-0
       #   0x00000200 - TV-1
       #
       #   0x00020000 - DFP-1
       #
       #   0x00010101 - CRT-0, TV-0 and DFP-0
       #
       #   0x000000FF - All CRTs
       #   0x0000FF00 - All TVs
       #   0x00FF0000 - All DFPs
       #
       #   Note that the following command:
       # 
       #     nvidia-settings -q [gpu:0]/EnabledDisplays
       #
       #   will list the available displays on the given GPU.
     
       nvidia-settings -a [gpu:0]/FrameLockMaster=0x00000001
       nvidia-settings -q [gpu:0]/FrameLockMaster
     
       # - Enable use of house sync signal
       nvidia-settings -a [framelock:0]/FrameLockUseHouseSync=1
     
       # - Configure the house sync signal video mode
       nvidia-settings -a [framelock:0]/FrameLockVideoMode=0
     
       # - Set the slave display device to none (to avoid
       #   having unwanted display devices locked to the
       #   sync signal.)
       nvidia-settings -a [gpu:0]/FrameLockSlaves=0x00000000
       nvidia-settings -q [gpu:0]/FrameLockSlaves
     
       # - Enable framelocking
       nvidia-settings -a [gpu:0]/FrameLockEnable=1
     
       # - Toggle the test signal
       nvidia-settings -a [gpu:0]/FrameLockTestSignal=1
       nvidia-settings -a [gpu:0]/FrameLockTestSignal=0
     
     
  2. 2 Systems, each with 2 GPUs, 1 Frame Lock board and 1 display device per
     GPU syncing from the first system's first display device:
     
       # - Make sure frame lock sync is disabled
       nvidia-settings -a myserver:0[gpu:0]/FrameLockEnable=0
       nvidia-settings -a myserver:0[gpu:1]/FrameLockEnable=0
       nvidia-settings -a myslave1:0[gpu:0]/FrameLockEnable=0
       nvidia-settings -a myslave1:0[gpu:1]/FrameLockEnable=0
     
       # - Query the enabled displays on the GPUs
       nvidia-settings -q myserver:0[gpu:0]/EnabledDisplays
       nvidia-settings -q myserver:0[gpu:1]/EnabledDisplays
       nvidia-settings -q myslave1:0[gpu:0]/EnabledDisplays
       nvidia-settings -q myslave1:0[gpu:1]/EnabledDisplays
     
       # - Check the refresh rate is the same for all displays
       nvidia-settings -q myserver:0[gpu:0]/RefreshRate
       nvidia-settings -q myserver:0[gpu:1]/RefreshRate
       nvidia-settings -q myslave1:0[gpu:0]/RefreshRate
       nvidia-settings -q myslave1:0[gpu:1]/RefreshRate
     
       # - Make sure the display device we want as master is masterable
       nvidia-settings -q myserver:0[gpu:0]/FrameLockMasterable
     
       # - Set the master display device (CRT-0)
       nvidia-settings -a myserver:0[gpu:0]/FrameLockMaster=0x00000001
     
       # - Disable the house sync signal on the master device
       nvidia-settings -a myserver:0[framelock:0]/FrameLockUseHouseSync=0
     
       # - Set the slave display devices
       nvidia-settings -a myserver:0[gpu:1]/FrameLockSlaves=0x00000001
       nvidia-settings -a myslave1:0[gpu:0]/FrameLockSlaves=0x00000001
       nvidia-settings -a myslave1:0[gpu:1]/FrameLockSlaves=0x00000001
     
       # - Enable framelocking on server
       nvidia-settings -a myserver:0[gpu:0]/FrameLockEnable=1
     
       # - Enable framelocking on slave devices
       nvidia-settings -a myserver:0[gpu:1]/FrameLockEnable=1
       nvidia-settings -a myslave1:0[gpu:0]/FrameLockEnable=1
       nvidia-settings -a myslave1:0[gpu:1]/FrameLockEnable=1
     
       # - Toggle the test signal
       nvidia-settings -a myserver:0[gpu:0]/FrameLockTestSignal=1
       nvidia-settings -a myserver:0[gpu:0]/FrameLockTestSignal=0
     
     
  3. 1 System, 4 GPUs, 2 Frame Lock boards and 2 display devices per GPU
     syncing from the first GPU's display device:
     
       # - Make sure frame lock sync is disabled
       nvidia-settings -a [gpu:0]/FrameLockEnable=0
       nvidia-settings -a [gpu:1]/FrameLockEnable=0
       nvidia-settings -a [gpu:2]/FrameLockEnable=0
       nvidia-settings -a [gpu:3]/FrameLockEnable=0
     
       # - Query the enabled displays on the GPUs
       nvidia-settings -q [gpu:0]/EnabledDisplays
       nvidia-settings -q [gpu:1]/EnabledDisplays
       nvidia-settings -q [gpu:2]/EnabledDisplays
       nvidia-settings -q [gpu:3]/EnabledDisplays
     
       # - Check the refresh rate is the same for all displays
       nvidia-settings -q [gpu:0]/RefreshRate
       nvidia-settings -q [gpu:1]/RefreshRate
       nvidia-settings -q [gpu:2]/RefreshRate
       nvidia-settings -q [gpu:3]/RefreshRate
     
       # - Make sure the display device we want as master is masterable
       nvidia-settings -q myserver:0[gpu:0]/FrameLockMasterable
     
       # - Set the master display device (CRT-0)
       nvidia-settings -a [gpu:0]/FrameLockMaster=0x00000001
     
       # - Disable the house sync signal on the master device
       nvidia-settings -a [framelock:0]/FrameLockUseHouseSync=1
     
       # - Set the slave display devices
       nvidia-settings -a [gpu:0]/FrameLockSlaves=0x00000002 # CRT-1
       nvidia-settings -a [gpu:1]/FrameLockSlaves=0x00000003 # CRT-0 and CRT-1
       nvidia-settings -a [gpu:2]/FrameLockSlaves=0x00000003 # CRT-0 and CRT-1
       nvidia-settings -a [gpu:3]/FrameLockSlaves=0x00000003 # CRT-0 and CRT-1
     
       # - Enable framelocking on master GPU
       nvidia-settings -a [gpu:0]/FrameLockEnable=1
     
       # - Enable framelocking on slave devices
       nvidia-settings -a [gpu:1]/FrameLockEnable=1
       nvidia-settings -a [gpu:2]/FrameLockEnable=1
       nvidia-settings -a [gpu:3]/FrameLockEnable=1
     
       # - Toggle the test signal
       nvidia-settings -a [gpu:0]/FrameLockTestSignal=1
       nvidia-settings -a [gpu:0]/FrameLockTestSignal=0
     
     


21I. LEVERAGING FRAME LOCK/GENLOCK IN OPENGL

With the GLX_NV_swap_group extension, OpenGL applications can be implemented
to join a group of applications within a system for local swap sync, and bind
the group to a barrier for swap sync across a frame lock group. A universal
frame counter is also provided to promote synchronization across applications.


21J. FRAME LOCK RESTRICTIONS:

The following restrictions must be met for enabling frame lock:

  1. All display devices set as client in a frame lock group must have the
     same mode timings as the server (master) display device. If a House Sync
     signal is used (instead of internal timings), all client display devices
     must be set to have the same refresh rate as the incoming house sync
     signal.

  2. All X Screens (driving the selected client/server display devices) must
     have the same stereo setting. See Appendix F for instructions on how to
     set the stereo X option.

  3. The frame lock server (master) display device must be on a GPU on the
     primary connector to a G-Sync device.

  4. If connecting a single GPU to a G-Sync device, the primary connector must
     be used.

  5. In configurations with more than one display device per GPU, we recommend
     enabling frame lock on all display devices on those GPUs.



21K. SUPPORTED FRAME LOCK CONFIGURATIONS:

The following configurations are currently supported:

  1. Basic Frame Lock: Single GPU, Single X Screen, Single Display Device with
     or without OpenGL applications that make use of Quad-Buffered Stereo
     and/or the GLX_NV_swap_group extension.

  2. Frame Lock + TwinView: Single GPU, Single X Screen, Multiple Display
     Devices with or without OpenGL applications that make use of
     Quad-Buffered Stereo and/or the GLX_NV_swap_group extension.

  3. Frame Lock + Xinerama: 1 or more GPU(s), Multiple X Screens, Multiple
     Display Devices with or without OpenGL applications that make use of
     Quad-Buffered Stereo and/or the GLX_NV_swap_group extension.

  4. Frame Lock + TwinView + Xinerama: 1 or more GPU(s), Multiple X Screens,
     Multiple Display Devices with or without OpenGL applications that make
     use of Quad-Buffered Stereo and/or the GLX_NV_swap_group extension.

  5. Frame Lock + SLI SFR, AFR, or AA: 2 GPUs, Single X Screen, Single Display
     Device with either OpenGL applications that make use of Quad-Buffered
     Stereo or the GLX_NV_swap_group extension. Note that for Frame Lock + SLI
     Frame Rendering applications that make use of both Quad-Buffered Stereo
     and the GLX_NV_swap_group extension are not supported. Note that only
     2-GPU SLI configurations are currently supported.

  6. Frame Lock + Multi-GPU SFR, AFR, or AA: 2 GPUs, Single X Screen, Single
     Display Device with either OpenGL applications that make use of
     Quad-Buffered Stereo or the GLX_NV_swap_group extension. Note that for
     Frame Lock + Multi-GPU Frame Rendering applications that make use of both
     Quad-Buffered Stereo and the GLX_NV_swap_group extension are not
     supported.


______________________________________________________________________________

Chapter 22. NVIDIA Contact Info and Additional Resources
______________________________________________________________________________

If you believe that you have found a bug or have a problem that you need
assitance with and cannot find the solution elsewhere, or if you have found
innaccuracies in this document, send email to freebsd-gfx-bugs@nvidia.com



Additional Resources

XFree86 Video Timings HOWTO

     http://www.tldp.org/HOWTO/XFree86-Video-Timings-HOWTO/index.html

The X.Org Foundation

     http://www.x.org/

OpenGL

     http://www.opengl.org/


______________________________________________________________________________

Chapter 23. Credits
______________________________________________________________________________

The port of the NVIDIA driver to FreeBSD is due in no small part to the many
contributions of Christian Zander <zander 'at' mail.minion.de> and Matthew N.
Dodd <mdodd 'at' freebsd.org>.

______________________________________________________________________________

Chapter 24. Acknowledgements
______________________________________________________________________________

The driver splash screen is decoded using 'libpng':
http://libpng.org/pub/png/libpng.html

This NVIDIA FreeBSD driver contains code from the int10 module of the X.Org
project.

The BSD implementations of the following compiler intrinsics are used for
better portability: __udivdi3, __umoddi3, __moddi3, __ucmpdi2, __cmpdi2,
__fixunssfdi, and __fixunsdfdi.

______________________________________________________________________________

Appendix E. Supported NVIDIA GPU Products
______________________________________________________________________________

For the most complete and accurate listing of supported GPUs, please see the
Supported Products List, available from the NVIDIA FreeBSD x86 Graphics Driver
download page. Please go to http://www.nvidia.com/object/unix.html, follow the
Archive link under the FreeBSD x86 heading, follow the link for the 100.14.09
driver, and then go to the Supported Products List.


E1. NVIDIA GEFORCE GPUS


    NVIDIA GPU product                    Device PCI ID
    ----------------------------------    ----------------------------------
    GeForce 6800 Ultra                    0x0040
    GeForce 6800                          0x0041
    GeForce 6800 LE                       0x0042
    GeForce 6800 XE                       0x0043
    GeForce 6800 XT                       0x0044
    GeForce 6800 GT                       0x0045
    GeForce 6800 GT                       0x0046
    GeForce 6800 GS                       0x0047
    GeForce 6800 XT                       0x0048
    GeForce 7800 GTX                      0x0090
    GeForce 7800 GTX                      0x0091
    GeForce 7800 GTX                      0x0092
    GeForce 7800 GS                       0x0093
    GeForce 7800 SLI                      0x0095
    GeForce Go 7800                       0x0098
    GeForce Go 7800 GTX                   0x0099
    GeForce 6800 GS                       0x00C0
    GeForce 6800                          0x00C1
    GeForce 6800 LE                       0x00C2
    GeForce 6800 XT                       0x00C3
    GeForce Go 6800                       0x00C8
    GeForce Go 6800 Ultra                 0x00C9
    GeForce 6800 Ultra/GeForce 6800       0x00F0
    GeForce 6600 GT                       0x00F1
    GeForce 6600                          0x00F2
    GeForce 6200                          0x00F3
    GeForce 6600 LE                       0x00F4
    GeForce 7800 GS                       0x00F5
    GeForce 6800 GS/XT                    0x00F6
    GeForce 6800 Ultra                    0x00F9
    GeForce PCX 5750                      0x00FA
    GeForce PCX 5900                      0x00FB
    GeForce PCX 5300                      0x00FC
    GeForce PCX 4300                      0x00FF
    GeForce 6600 GT                       0x0140
    GeForce 6600                          0x0141
    GeForce 6600 LE                       0x0142
    GeForce 6600 VE                       0x0143
    GeForce Go 6600                       0x0144
    GeForce 6610 XL                       0x0145
    GeForce Go 6600 TE/6200 TE            0x0146
    GeForce 6700 XL                       0x0147
    GeForce Go 6600                       0x0148
    GeForce Go 6600 GT                    0x0149
    GeForce 6200                          0x014F
    GeForce 6500                          0x0160
    GeForce 6200 TurboCache(TM)           0x0161
    GeForce 6200SE TurboCache(TM)         0x0162
    GeForce 6200 LE                       0x0163
    GeForce Go 6200                       0x0164
    GeForce Go 6400                       0x0166
    GeForce Go 6200                       0x0167
    GeForce Go 6400                       0x0168
    GeForce 6250                          0x0169
    GeForce 7100 GS                       0x016A
    GeForce 8800 GTX                      0x0191
    GeForce 8800 GTS                      0x0193
    GeForce 8800 Ultra                    0x0194
    GeForce 7350 LE                       0x01D0
    GeForce 7300 LE                       0x01D1
    GeForce 7300 SE/7200 GS               0x01D3
    GeForce Go 7200                       0x01D6
    GeForce Go 7300                       0x01D7
    GeForce Go 7400                       0x01D8
    GeForce 7500 LE                       0x01DD
    GeForce 7300 GS                       0x01DF
    GeForce 6800                          0x0211
    GeForce 6800 LE                       0x0212
    GeForce 6800 GT                       0x0215
    GeForce 6800 XT                       0x0218
    GeForce 6200                          0x0221
    GeForce 6200 A-LE                     0x0222
    GeForce 6150                          0x0240
    GeForce 6150 LE                       0x0241
    GeForce 6100                          0x0242
    GeForce Go 6150                       0x0244
    GeForce Go 6100                       0x0247
    GeForce 7900 GTX                      0x0290
    GeForce 7900 GT/GTO                   0x0291
    GeForce 7900 GS                       0x0292
    GeForce 7950 GX2                      0x0293
    GeForce 7950 GX2                      0x0294
    GeForce 7950 GT                       0x0295
    GeForce Go 7950 GTX                   0x0297
    GeForce Go 7900 GS                    0x0298
    GeForce Go 7900 GTX                   0x0299
    GeForce 7600 GT/Unknown GPU           0x02E0
    GeForce 7600 GS                       0x02E1
    GeForce FX 5800 Ultra                 0x0301
    GeForce FX 5800                       0x0302
    GeForce FX 5600 Ultra                 0x0311
    GeForce FX 5600                       0x0312
    GeForce FX 5600XT                     0x0314
    GeForce FX Go5600                     0x031A
    GeForce FX Go5650                     0x031B
    GeForce FX 5200                       0x0320
    GeForce FX 5200 Ultra                 0x0321
    GeForce FX 5200                       0x0322
    GeForce FX 5200LE                     0x0323
    GeForce FX Go5200                     0x0324
    GeForce FX Go5250                     0x0325
    GeForce FX 5500                       0x0326
    GeForce FX 5100                       0x0327
    GeForce FX Go5200 32M/64M             0x0328
    GeForce FX Go53xx                     0x032C
    GeForce FX Go5100                     0x032D
    GeForce FX 5900 Ultra                 0x0330
    GeForce FX 5900                       0x0331
    GeForce FX 5900XT                     0x0332
    GeForce FX 5950 Ultra                 0x0333
    GeForce FX 5900ZT                     0x0334
    GeForce FX 5700 Ultra                 0x0341
    GeForce FX 5700                       0x0342
    GeForce FX 5700LE                     0x0343
    GeForce FX 5700VE                     0x0344
    GeForce FX Go5700                     0x0347
    GeForce FX Go5700                     0x0348
    GeForce 7650 GS                       0x0390
    GeForce 7600 GT                       0x0391
    GeForce 7600 GS                       0x0392
    GeForce 7300 GT                       0x0393
    GeForce 7600 LE                       0x0394
    GeForce 7300 GT                       0x0395
    GeForce Go 7600                       0x0398
    GeForce 6150SE nForce 430             0x03D0
    GeForce 6100 nForce 405               0x03D1
    GeForce 6100 nForce 400               0x03D2
    GeForce 6100 nForce 420               0x03D5
    GeForce 8600 GTS                      0x0400
    GeForce 8600 GT                       0x0402
    GeForce 8600M GT                      0x0407
    GeForce 8500 GT                       0x0421
    GeForce 8400 GS                       0x0422
    GeForce 8300 GS                       0x0423
    GeForce 8600M GS                      0x0425
    GeForce 8400M GT                      0x0426
    GeForce 8400M GS                      0x0427
    GeForce 8400M G                       0x0428



E2. NVIDIA QUADRO GPUS


    NVIDIA GPU product                                        Device PCI ID
    ------------------------------------------------------    ---------------
    Quadro FX 4000                                            0x004E
    Quadro FX 4500                                            0x009D
    Quadro FX Go1400                                          0x00CC
    Quadro FX 3450/4000 SDI                                   0x00CD
    Quadro FX 1400                                            0x00CE
    Quadro FX 4400/Quadro FX 3400                             0x00F8
    Quadro FX 330                                             0x00FC
    Quadro NVS 280 PCI-E/Quadro FX 330                        0x00FD
    Quadro FX 1300                                            0x00FE
    Quadro NVS 440                                            0x014A
    Quadro FX 540M/Quadro FX 540M                             0x014C
    Quadro FX 550                                             0x014D
    Quadro FX 540                                             0x014E
    Quadro NVS 285                                            0x0165
    Quadro FX 5600                                            0x019D
    Quadro FX 4600                                            0x019E
    Quadro NVS 110M                                           0x01D7
    Quadro NVS 110M                                           0x01DA
    Quadro NVS 120M                                           0x01DB
    Quadro FX 350M                                            0x01DC
    Quadro FX 350                                             0x01DE
    Quadro NVS 210S / NVIDIA GeForce 6150LE                   0x0245
    Quadro FX 2500M                                           0x029A
    Quadro FX 1500M                                           0x029B
    Quadro FX 5500                                            0x029C
    Quadro FX 3500                                            0x029D
    Quadro FX 1500                                            0x029E
    Quadro FX 4500 X2                                         0x029F
    Quadro FX 2000                                            0x0308
    Quadro FX 1000                                            0x0309
    Quadro FX Go700                                           0x031C
    Quadro NVS 55/280 PCI                                     0x032A
    Quadro FX 500/FX 600                                      0x032B
    Quadro FX 3000                                            0x0338
    Quadro FX 700                                             0x033F
    Quadro FX Go1000                                          0x034C
    Quadro FX 1100                                            0x034E
    Quadro FX 560                                             0x039E
    Quadro NVS 320M                                           0x040B
    Quadro FX 570M                                            0x040C
    Quadro FX 1600M                                           0x040D
    Quadro NVS 140M                                           0x0429
    Quadro NVS 130M                                           0x042A
    Quadro NVS 135M                                           0x042B
    Quadro FX 360M                                            0x042D


Below are the legacy GPUs that are no longer supported in the unified driver.
These GPUs will continue to be maintained through the special legacy NVIDIA
GPU driver releases.

The 1.0-96xx driver supports the following set of GPUs:


    NVIDIA GPU product                    Device PCI ID
    ----------------------------------    ----------------------------------
    GeForce2 MX/MX 400                    0x0110
    GeForce2 MX 100/200                   0x0111
    GeForce2 Go                           0x0112
    Quadro2 MXR/EX/Go                     0x0113
    GeForce4 MX 460                       0x0170
    GeForce4 MX 440                       0x0171
    GeForce4 MX 420                       0x0172
    GeForce4 MX 440-SE                    0x0173
    GeForce4 440 Go                       0x0174
    GeForce4 420 Go                       0x0175
    GeForce4 420 Go 32M                   0x0176
    GeForce4 460 Go                       0x0177
    Quadro4 550 XGL                       0x0178
    GeForce4 440 Go 64M                   0x0179
    Quadro NVS 400                        0x017A
    Quadro4 500 GoGL                      0x017C
    GeForce4 410 Go 16M                   0x017D
    GeForce4 MX 440 with AGP8X            0x0181
    GeForce4 MX 440SE with AGP8X          0x0182
    GeForce4 MX 420 with AGP8X            0x0183
    GeForce4 MX 4000                      0x0185
    Quadro4 580 XGL                       0x0188
    Quadro NVS 280 SD                     0x018A
    Quadro4 380 XGL                       0x018B
    Quadro NVS 50 PCI                     0x018C
    GeForce2 Integrated GPU               0x01A0
    GeForce4 MX Integrated GPU            0x01F0
    GeForce3                              0x0200
    GeForce3 Ti 200                       0x0201
    GeForce3 Ti 500                       0x0202
    Quadro DCC                            0x0203
    GeForce4 Ti 4600                      0x0250
    GeForce4 Ti 4400                      0x0251
    GeForce4 Ti 4200                      0x0253
    Quadro4 900 XGL                       0x0258
    Quadro4 750 XGL                       0x0259
    Quadro4 700 XGL                       0x025B
    GeForce4 Ti 4800                      0x0280
    GeForce4 Ti 4200 with AGP8X           0x0281
    GeForce4 Ti 4800 SE                   0x0282
    GeForce4 4200 Go                      0x0286
    Quadro4 980 XGL                       0x0288
    Quadro4 780 XGL                       0x0289
    Quadro4 700 GoGL                      0x028C


The 1.0-71xx driver supports the following set of GPUs:


    NVIDIA GPU product                    Device PCI ID
    ----------------------------------    ----------------------------------
    RIVA TNT                              0x0020
    RIVA TNT2/TNT2 Pro                    0x0028
    RIVA TNT2 Ultra                       0x0029
    Vanta/Vanta LT                        0x002C
    RIVA TNT2 Model 64/Model 64 Pro       0x002D
    Aladdin TNT2                          0x00A0
    GeForce 256                           0x0100
    GeForce DDR                           0x0101
    Quadro                                0x0103
    GeForce2 GTS/GeForce2 Pro             0x0150
    GeForce2 Ti                           0x0151
    GeForce2 Ultra                        0x0152
    Quadro2 Pro                           0x0153


______________________________________________________________________________

Appendix F. X Config Options
______________________________________________________________________________

The following driver options are supported by the NVIDIA X driver. They may be
specified either in the Screen or Device sections of the X config file.

X Config Options

Option "NvAGP" "integer"

    Configure AGP support. Integer argument can be one of:
    
        Value             Behavior
        --------------    ---------------------------------------------------
        0                 disable AGP
        1                 use NVIDIA internal AGP support, if possible
        2                 use AGPGART, if possible
        3                 use any AGP support (try AGPGART, then NVIDIA AGP)
    
    Note that NVIDIA internal AGP support cannot work if AGPGART is either
    statically compiled into your kernel or is built as a module and loaded
    into your kernel. See Chapter 9 for details. Default: 3.

Option "NoLogo" "boolean"

    Disable drawing of the NVIDIA logo splash screen at X startup. Default:
    the logo is drawn.

Option "LogoPath" "string"

    Sets the path to the PNG file to be used as the logo splash screen at X
    startup. If the PNG file specified has a bKGD (background color) chunk,
    then the screen is cleared to the color it specifies. Otherwise, the
    screen is cleared to black. The logo file must be owned by root and must
    not be writable by a non-root group. Default: The built-in NVIDIA logo is
    used.

Option "RenderAccel" "boolean"

    Enable or disable hardware acceleration of the RENDER extension. Default:
    hardware acceleration of the RENDER extension is enabled.

Option "NoRenderExtension" "boolean"

    Disable the RENDER extension. Other than recompiling it, the X server does
    not seem to have another way of disabling this. Fortunately, we can
    control this from the driver so we export this option. This is useful in
    depth 8 where RENDER would normally steal most of the default colormap.
    Default: RENDER is offered when possible.

Option "UBB" "boolean"

    Enable or disable the Unified Back Buffer on Quadro-based GPUs (Quadro4
    NVS excluded); see Chapter 17 for a description of UBB. This option has no
    effect on non-Quadro GPU products. Default: UBB is on for Quadro GPUs.

Option "NoFlip" "boolean"

    Disable OpenGL flipping; see Chapter 17 for a description. Default: OpenGL
    will swap by flipping when possible.

Option "Dac8Bit" "boolean"

    Most Quadro products by default use a 10-bit color look-up table (LUT);
    setting this option to TRUE forces these GPUs to use an 8-bit (LUT).
    Default: a 10-bit LUT is used, when available.

Option "Overlay" "boolean"

    Enables RGB workstation overlay visuals. This is only supported on Quadro
    GPUs (Quadro NVS GPUs excluded) in depth 24. This option causes the server
    to advertise the SERVER_OVERLAY_VISUALS root window property and GLX will
    report single- and double-buffered, Z-buffered 16-bit overlay visuals. The
    transparency key is pixel 0x0000 (hex). There is no gamma correction
    support in the overlay plane. This feature requires XFree86 version 4.1.0
    or newer, or the X.Org X server. When TwinView is enabled, or the X screen
    is either wider than 2046 pixels or taller than 2047, the overlay may be
    emulated with a substantial performance penalty. RGB workstation overlays
    are not supported when the Composite extension is enabled. Dynamic
    TwinView is disabled when Overlays are enabled. Default: off.

    UBB must be enabled when overlays are enabled (this is the default
    behavior).

Option "CIOverlay" "boolean"

    Enables Color Index workstation overlay visuals with identical
    restrictions to Option "Overlay" above. The server will offer visuals both
    with and without a transparency key. These are depth 8 PseudoColor
    visuals. Enabling Color Index overlays on X servers older than XFree86 4.3
    will force the RENDER extension to be disabled due to bugs in the RENDER
    extension in older X servers. Color Index workstation overlays are not
    supported when the Composite extension is enabled. Default: off.

    UBB must be enabled when overlays are enabled (this is the default
    behavior).

Option "TransparentIndex" "integer"

    When color index overlays are enabled, use this option to choose which
    pixel is used for the transparent pixel in visuals featuring transparent
    pixels. This value is clamped between 0 and 255 (Note: some applications
    such as Alias's Maya require this to be zero in order to work correctly).
    Default: 0.

Option "OverlayDefaultVisual" "boolean"

    When overlays are used, this option sets the default visual to an overlay
    visual thereby putting the root window in the overlay. This option is not
    recommended for RGB overlays. Default: off.

Option "EmulatedOverlaysTimerMs" "integer"

    Enables the use of a timer within the X server to perform the updates to
    the emulated overlay or CI overlay. This option can be used to improve the
    performance of the emulated or CI overlays by reducing the frequency of
    the updates. The value specified indicates the desired number of
    milliseconds between overlay updates. To disable the use of the timer
    either leave the option unset or set it to 0. Default: off.

Option "EmulatedOverlaysThreshold" "boolean"

    Enables the use of a threshold within the X server to perform the updates
    to the emulated overlay or CI overlay. The emulated or CI overlay updates
    can be defered but this threshold will limit the number of defered OpenGL
    updates allowed before the overlay is updated. This option can be used to
    trade off performance and animation quality. Default: on.

Option "EmulatedOverlaysThresholdValue" "integer"

    Controls the threshold used in updating the emulated or CI overlays. This
    is used in conjunction with the EmulatedOverlaysThreshold option to trade
    off performance and animation quality. Higher values for this option favor
    performance over quality. Setting low values of this option will not cause
    the overlay to be updated more often than the frequence specified by the
    EmulatedOverlaysTimerMs option. Default: 5.

Option "RandRRotation" "boolean"

    Enable rotation support for the XRandR extension. This allows use of the
    XRandR X server extension for configuring the screen orientation through
    rotation. This feature is supported using depth 24. This requires an X.Org
    X 6.8.1 or newer X server. This feature does not work with hardware
    overlays; emulated overlays will be used instead at a substantial
    performance penalty. See Chapter 14 for details. Default: off.

Option "Rotate" "string"

    Enable static rotation support. Unlike the RandRRotation option above,
    this option takes effect as soon as the X server is started and will work
    with older versions of X. This feature is supported using depth 24. This
    feature does not work with hardware overlays; emulated overlays will be
    used instead at a substantial performance penalty. This option is not
    compatible with the RandR extension. Valid rotations are "normal", "left",
    "inverted", and "right". Default: off.

Option "AllowDDCCI" "boolean"

    Enables DDC/CI support in the NV-CONTROL X extension. DDC/CI is a
    mechanism for communication between your computer and your display device.
    This can be used to set the values normally controlled through your
    display device's On Screen Display. See the DDC/CI NV-CONTROL attributes
    in 'NVCtrl.h' and functions in 'NVCtrlLib.h' in the 'nvidia-settings'
    source code. Default: off (DDC/CI is disabled).

Option "SWCursor" "boolean"

    Enable or disable software rendering of the X cursor. Default: off.

Option "HWCursor" "boolean"

    Enable or disable hardware rendering of the X cursor. Default: on.

Option "CursorShadow" "boolean"

    Enable or disable use of a shadow with the hardware accelerated cursor;
    this is a black translucent replica of your cursor shape at a given offset
    from the real cursor. Default: off (no cursor shadow).

Option "CursorShadowAlpha" "integer"

    The alpha value to use for the cursor shadow; only applicable if
    CursorShadow is enabled. This value must be in the range [0, 255] -- 0 is
    completely transparent; 255 is completely opaque. Default: 64.

Option "CursorShadowXOffset" "integer"

    The offset, in pixels, that the shadow image will be shifted to the right
    from the real cursor image; only applicable if CursorShadow is enabled.
    This value must be in the range [0, 32]. Default: 4.

Option "CursorShadowYOffset" "integer"

    The offset, in pixels, that the shadow image will be shifted down from the
    real cursor image; only applicable if CursorShadow is enabled. This value
    must be in the range [0, 32]. Default: 2.

Option "ConnectedMonitor" "string"

    Allows you to override what the NVIDIA kernel module detects is connected
    to your graphics card. This may be useful, for example, if you use a KVM
    (keyboard, video, mouse) switch and you are switched away when X is
    started. In such a situation, the NVIDIA kernel module cannot detect what
    display devices are connected, and the NVIDIA X driver assumes you have a
    single CRT.

    Valid values for this option are "CRT" (cathode ray tube), "DFP" (digital
    flat panel), or "TV" (television); if using TwinView, this option may be a
    comma-separated list of display devices; e.g.: "CRT, CRT" or "CRT, DFP".

    It is generally recommended to not use this option, but instead use the
    "UseDisplayDevice" option.

    NOTE: anything attached to a 15 pin VGA connector is regarded by the
    driver as a CRT. "DFP" should only be used to refer to digital flat panels
    connected via a DVI port.

    Default: string is NULL (the NVIDIA driver will detect the connected
    display devices).

Option "UseDisplayDevice" "string"

    When assigning display devices to X screens, the NVIDIA X driver by
    default assigns display devices in the order they are found (looking first
    at CRTs, then at DFPs, and finally at TVs). This option can be used to
    override this assignment. For example, if both a CRT and a DFP are
    connected, you could specify:
    
        Option "UseDisplayDevice" "DFP"
    
    to make the X screen use the DFP, even though it would have used a CRT by
    default.

    Note the subtle difference between this option and the "ConnectedMonitor"
    option: the "ConnectedMonitor" option overrides what display devices are
    actually detected, while the "UseDisplayDevice" option controls which of
    the detected display devices will be used on this X screen.

Option "UseEdidFreqs" "boolean"

    This option controls whether the NVIDIA X driver will use the HorizSync
    and VertRefresh ranges given in a display device's EDID, if any. When
    UseEdidFreqs is set to True, EDID-provided range information will override
    the HorizSync and VertRefresh ranges specified in the Monitor section. If
    a display device does not provide an EDID, or the EDID does not specify an
    hsync or vrefresh range, then the X server will default to the HorizSync
    and VertRefresh ranges specified in the Monitor section of your X config
    file. These frequency ranges are used when validating modes for your
    display device.

    Default: True (EDID frequencies will be used)

Option "UseEDID" "boolean"

    By default, the NVIDIA X driver makes use of a display device's EDID, when
    available, during construction of its mode pool. The EDID is used as a
    source for possible modes, for valid frequency ranges, and for collecting
    data on the physical dimensions of the display device for computing the
    DPI (see Appendix I). However, if you wish to disable the driver's use of
    the EDID, you can set this option to False:
    
        Option "UseEDID" "FALSE"
    
    Note that, rather than globally disable all uses of the EDID, you can
    individually disable each particular use of the EDID; e.g.,
    
        Option "UseEDIDFreqs" "FALSE"
        Option "UseEDIDDpi" "FALSE"
        Option "ModeValidation" "NoEdidModes"
    
    Default: True (use EDID).

Option "IgnoreEDID" "boolean"

    This option is deprecated, and no longer affects behavior of the X driver.
    See the "UseEDID" option for details.

Option "NoDDC" "boolean"

    Synonym for "IgnoreEDID". This option is deprecated, and no longer affects
    behavior of the X driver. See the "UseEDID" option for details.

Option "UseInt10Module" "boolean"

    Enable use of the X Int10 module to soft-boot all secondary cards, rather
    than POSTing the cards through the NVIDIA kernel module. Default: off
    (POSTing is done through the NVIDIA kernel module).

Option "TwinView" "boolean"

    Enable or disable TwinView. See Chapter 10 for details. Default: off
    (TwinView is disabled).

Option "TwinViewOrientation" "string"

    Controls the relationship between the two display devices when using
    TwinView. Takes one of the following values: "RightOf" "LeftOf" "Above"
    "Below" "Clone". See Chapter 10 for details. Default: string is NULL.

Option "SecondMonitorHorizSync" "range(s)"

    This option is like the HorizSync entry in the Monitor section, but is for
    the second monitor when using TwinView. See Chapter 10 for details.
    Default: none.

Option "SecondMonitorVertRefresh" "range(s)"

    This option is like the VertRefresh entry in the Monitor section, but is
    for the second monitor when using TwinView. See Chapter 10 for details.
    Default: none.

Option "MetaModes" "string"

    This option describes the combination of modes to use on each monitor when
    using TwinView. See Chapter 10 for details. Default: string is NULL.

Option "NoTwinViewXineramaInfo" "boolean"

    When in TwinView, the NVIDIA X driver normally provides a Xinerama
    extension that X clients (such as window managers) can use to discover the
    current TwinView configuration, such as where each display device is
    positioned within the X screen. Some window mangers get confused by this
    information, so this option is provided to disable this behavior. Default:
    false (TwinView Xinerama information is provided).

Option "TwinViewXineramaInfoOrder" "string"

    When the NVIDIA X driver provides TwinViewXineramaInfo (see the
    NoTwinViewXineramaInfo X config option), it by default reports the
    currently enabled display devices in the order "CRT, DFP, TV". The
    TwinViewXineramaInfoOrder X config option can be used to override this
    order.

    The option string is a comma-separated list of display device names. The
    display device names can either be general (e.g, "CRT", which identifies
    all CRTs), or specific (e.g., "CRT-1", which identifies a particular CRT).
    Not all display devices need to be identified in the option string;
    display devices that are not listed will be implicitly appended to the end
    of the list, in their default order.

    Note that TwinViewXineramaInfoOrder tracks all display devices that could
    possibly be connected to the GPU, not just the ones that are currently
    enabled. When reporting the Xinerama information, the NVIDIA X driver
    walks through the display devices in the order specified, only reporting
    enabled display devices.

    Examples:
    
            "DFP"
            "TV, DFP"
            "DFP-1, DFP-0, TV, CRT"
    
    In the first example, any enabled DFPs would be reported first (any
    enabled CRTs or TVs would be reported afterwards). In the second example,
    any enabled TVs would be reported first, then any enabled DFPs (any
    enabled CRTs would be reported last). In the last example, if DFP-1 were
    enabled, it would be reported first, then DFP-0, then any enabled TVs, and
    then any enabled CRTs; finally, any other enabled DFPs would be reported.

    Default: "CRT, DFP, TV"

Option "TVStandard" "string"

    See Chapter 13 for details on configuring TV-out.

Option "TVOutFormat" "string"

    See Chapter 13 for details on configuring TV-out.

Option "TVOverScan" "Decimal value in the range 0.0 to 1.0"

    Valid values are in the range 0.0 through 1.0; See Chapter 13 for details
    on configuring TV-out.

Option "Stereo" "integer"

    Enable offering of quad-buffered stereo visuals on Quadro. Integer
    indicates the type of stereo equipment being used:
    
        Value             Equipment
        --------------    ---------------------------------------------------
        1                 DDC glasses. The sync signal is sent to the
                          glasses via the DDC signal to the monitor. These
                          usually involve a passthrough cable between the
                          monitor and the graphics card. This mode is not
                          available on G8xGL and higher GPUs.
        2                 "Blueline" glasses. These usually involve a
                          passthrough cable between the monitor and graphics
                          card. The glasses know which eye to display based
                          on the length of a blue line visible at the bottom
                          of the screen. When in this mode, the root window
                          dimensions are one pixel shorter in the Y
                          dimension than requested. This mode does not work
                          with virtual root window sizes larger than the
                          visible root window size (desktop panning). This
                          mode is not available on G8xGL and higher GPUs.
        3                 Onboard stereo support. This is usually only found
                          on professional cards. The glasses connect via a
                          DIN connector on the back of the graphics card.
        4                 TwinView clone mode stereo (aka "passive" stereo).
                          On graphics cards that support TwinView, the left
                          eye is displayed on the first display, and the
                          right eye is displayed on the second display. This
                          is normally used in conjunction with special
                          projectors to produce 2 polarized images which are
                          then viewed with polarized glasses. To use this
                          stereo mode, you must also configure TwinView in
                          clone mode with the same resolution, panning
                          offset, and panning domains on each display.
        5                 Vertical interlaced stereo mode, for use with
                          SeeReal Stereo Digital Flat Panels.
        6                 Color interleaved stereo mode, for use with
                          Sharp3D Stereo Digital Flat Panels.
    
    Stereo is only available on Quadro cards. Stereo options 1, 2, and 3 (aka
    "active" stereo) may be used with TwinView if all modes within each
    MetaMode have identical timing values. See Chapter 16 for suggestions on
    making sure the modes within your MetaModes are identical. The identical
    ModeLine requirement is not necessary for Stereo option 4 ("passive"
    stereo). Currently, stereo operation may be "quirky" on the original
    Quadro (NV10) GPU and left-right flipping may be erratic. We are trying to
    resolve this issue for a future release. Default: 0 (Stereo is not
    enabled).

    UBB must be enabled when stereo is enabled (this is the default behavior).

    Stereo options 1, 2, and 3 (aka "active" stereo) are not supported on
    digital flat panels.

    Multi-GPU cards (such as the Quadro FX 4500 X2) provide a single connector
    for onboard stereo support (option 3), which is tied to the bottommost
    GPU. In order to synchronize onboard stereo with the other GPU, you must
    use a G-Sync device (see Chapter 21 for details).

Option "AllowDFPStereo" "boolean"

    By default, the NVIDIA X driver performs a check which disables active
    stereo (stereo options 1, 2, and 3) if the X screen is driving a DFP. The
    "AllowDFPStereo" option bypasses this check.

Option "ForceStereoFlipping" "boolean"

    Stereo flipping is the process by which left and right eyes are displayed
    on alternating vertical refreshes. Normally, stereo flipping is only
    performed when a stereo drawable is visible. This option forces stereo
    flipping even when no stereo drawables are visible.

    This is to be used in conjunction with the "Stereo" option. If "Stereo" is
    0, the "ForceStereoFlipping" option has no effect. If otherwise, the
    "ForceStereoFlipping" option will force the behavior indicated by the
    "Stereo" option, even if no stereo drawables are visible. This option is
    useful in a multiple-screen environment in which a stereo application is
    run on a different screen than the stereo master.

    Possible values:
    
        Value             Behavior
        --------------    ---------------------------------------------------
        0                 Stereo flipping is not forced. The default
                          behavior as indicated by the "Stereo" option is
                          used.
        1                 Stereo flipping is forced. Stereo is running even
                          if no stereo drawables are visible. The stereo
                          mode depends on the value of the "Stereo" option.
    
    Default: 0 (Stereo flipping is not forced). Note that active stereo is not
    supported on digital flat panels.

Option "XineramaStereoFlipping" "boolean"

    By default, when using Stereo with Xinerama, all physical X screens having
    a visible stereo drawable will stereo flip. Use this option to allow only
    one physical X screen to stereo flip at a time.

    This is to be used in conjunction with the "Stereo" and "Xinerama"
    options. If "Stereo" is 0 or "Xinerama" is 0, the "XineramaStereoFlipping"
    option has no effect.

    If you wish to have all X screens stereo flip all the time, see the
    "ForceStereoFlipping" option.

    Possible values:
    
        Value             Behavior
        --------------    ---------------------------------------------------
        0                 Stereo flipping is enabled on one X screen at a
                          time. Stereo is enabled on the first X screen
                          having the stereo drawable.
        1                 Stereo flipping in enabled on all X screens.
    
    Default: 1 (Stereo flipping is enabled on all X screens).

Option "NoBandWidthTest" "boolean"

    As part of mode validation, the X driver tests if a given mode fits within
    the hardware's memory bandwidth constraints. This option disables this
    test. Default: false (the memory bandwidth test is performed).

Option "IgnoreDisplayDevices" "string"

    This option tells the NVIDIA kernel module to completely ignore the
    indicated classes of display devices when checking what display devices
    are connected. You may specify a comma-separated list containing any of
    "CRT", "DFP", and "TV". For example:
    
    Option "IgnoreDisplayDevices" "DFP, TV"
    
    will cause the NVIDIA driver to not attempt to detect if any digital flat
    panels or TVs are connected. This option is not normally necessary;
    however, some video BIOSes contain incorrect information about what
    display devices may be connected, or what i2c port should be used for
    detection. These errors can cause long delays in starting X. If you are
    experiencing such delays, you may be able to avoid this by telling the
    NVIDIA driver to ignore display devices which you know are not connected.
    NOTE: anything attached to a 15 pin VGA connector is regarded by the
    driver as a CRT. "DFP" should only be used to refer to digital flat panels
    connected via a DVI port.

Option "MultisampleCompatibility" "boolean"

    Enable or disable the use of separate front and back multisample buffers.
    Enabling this will consume more memory but is necessary for correct output
    when rendering to both the front and back buffers of a multisample or FSAA
    drawable. This option is necessary for correct operation of SoftImage XSI.
    Default: false (a single multisample buffer is shared between the front
    and back buffers).

Option "NoPowerConnectorCheck" "boolean"

    The NVIDIA X driver will abort X server initialization if it detects that
    a GPU that requires an external power connector does not have an external
    power connector plugged in. This option can be used to bypass this test.
    Default: false (the power connector test is performed).

Option "XvmcUsesTextures" "boolean"

    Forces XvMC to use the 3D engine for XvMCPutSurface requests rather than
    the video overlay. Default: false (video overlay is used when available).

Option "AllowGLXWithComposite" "boolean"

    Enables GLX even when the Composite X extension is loaded. ENABLE AT YOUR
    OWN RISK. OpenGL applications will not display correctly in many
    circumstances with this setting enabled.

    This option is intended for use on X.Org X servers older than X11R6.9.0.
    On X11R6.9.0 or newer X servers, the NVIDIA OpenGL implementation
    interacts properly by default with the Composite X extension and this
    option should not be needed. However, on X11R6.9.0 or newer X servers,
    support for GLX with Composite can be disabled by setting this option to
    False.

    Default: false (GLX is disabled when Composite is enabled on X servers
    older than X11R6.9.0).

Option "AddARGBGLXVisuals" "boolean"

    Adds a 32-bit ARGB visual for each supported OpenGL configuration. This
    allows applications to use OpenGL to render with alpha transparency into
    32-bit windows and pixmaps. This option requires the Composite extension.
    Default: ARGB GLX visuals are enabled on X servers new enough to support
    them when the Composite extension is also enabled.

Option "DisableGLXRootClipping" "boolean"

    If enabled, no clipping will be performed on rendering done by OpenGL in
    the root window. This option is deprecated. It is needed by older versions
    of OpenGL-based composite managers that draw the contents of redirected
    windows directly into the root window using OpenGL. Most OpenGL-based
    composite managers have been updated to support the Composite Overlay
    Window, a feature introduced in Xorg release 7.1. Using the Composite
    Overlay Window is the preferred method for performing OpenGL-based
    compositing.

Option "DamageEvents" "boolean"

    Use OS-level events to efficiently notify X when a client has performed
    direct rendering to a window that needs to be composited. This will
    significantly improve performance and interactivity when using GLX
    applications with a composite manager running. It will also affect
    applications using GLX when rotation is enabled. This option is currently
    incompatible with SLI and Multi-GPU modes and will be disabled if either
    are used. Enabled by default.

Option "ExactModeTimingsDVI" "boolean"

    Forces the initialization of the X server with the exact timings specified
    in the ModeLine. Default: false (for DVI devices, the X server initializes
    with the closest mode in the EDID list).

Option "Coolbits" "integer"

    Enables support in the NV-CONTROL X extension for manipulating GPU clock
    settings. When this option is set to "1" the nvidia-settings utility will
    contain a page labeled "Clock Frequencies" through which clock settings
    can be manipulated. Coolbits is only available on GeForce FX, Quadro FX,
    and newer desktop GPUs. On GeForce FX and newer mobile GPUs, limited clock
    manipulation support is available when the "Coolbits" option is set to
    "1": clocks can be lowered relative to the default settings; overclocking
    is not supported due to the thermal constraints of notebook designs. The
    default for this option is 0 (support is disabled).

    WARNING: this may cause system damage and void warranties. This utility
    can run your computer system out of the manufacturer's design
    specifications, including, but not limited to: higher system voltages,
    above normal temperatures, excessive frequencies, and changes to BIOS that
    may corrupt the BIOS. Your computer's operating system may hang and result
    in data loss or corrupted images. Depending on the manufacturer of your
    computer system, the computer system, hardware and software warranties may
    be voided, and you may not receive any further manufacturer support.
    NVIDIA does not provide customer service support for the Coolbits option.
    It is for these reasons that absolutely no warranty or guarantee is either
    express or implied. Before enabling and using, you should determine the
    suitability of the utility for your intended use, and you shall assume all
    responsibility in connection therewith.

Option "MultiGPU" "string"

    This option controls the configuration of Multi-GPU rendering in supported
    configurations.
    
        Value                               Behavior
        --------------------------------    --------------------------------
        0, no, off, false, Single           Use only a single GPU when
                                            rendering
        1, yes, on, true, Auto              Enable Multi-GPU and allow the
                                            driver to automatically select
                                            the appropriate rendering mode.
        AFR                                 Enable Multi-GPU and use the
                                            Alternate Frame Rendering mode.
        SFR                                 Enable Multi-GPU and use the
                                            Split Frame Rendering mode.
        AA                                  Enable Multi-GPU and use
                                            antialiasing. Use this in
                                            conjunction with full scene
                                            antialiasing to improve visual
                                            quality.
    
    
Option "SLI" "string"

    This option controls the configuration of SLI rendering in supported
    configurations.
    
        Value                               Behavior
        --------------------------------    --------------------------------
        0, no, off, false, Single           Use only a single GPU when
                                            rendering
        1, yes, on, true, Auto              Enable SLI and allow the driver
                                            to automatically select the
                                            appropriate rendering mode.
        AFR                                 Enable SLI and use the Alternate
                                            Frame Rendering mode.
        SFR                                 Enable SLI and use the Split
                                            Frame Rendering mode.
        AA                                  Enable SLI and use SLI
                                            Antialiasing. Use this in
                                            conjunction with full scene
                                            antialiasing to improve visual
                                            quality.
        AFRofAA                             Enable SLI and use SLI Alternate
                                            Frame Rendering of Antialiasing
                                            mode. Use this in conjunction
                                            with full scene antialiasing to
                                            improve visual quality. This
                                            option is only valid for SLI
                                            configurations with 4 GPUs.
    
    
Option "TripleBuffer" "boolean"

    Enable or disable the use of triple buffering. If this option is enabled,
    OpenGL windows that sync to vblank and are double-buffered will be given a
    third buffer. This decreases the time an application stalls while waiting
    for vblank events, but increases latency slightly (delay between user
    input and displayed result).

Option "DPI" "string"

    This option specifies the Dots Per Inch for the X screen; for example:
    
        Option "DPI" "75 x 85"
    
    will set the horizontal DPI to 75 and the vertical DPI to 85. By default,
    the X driver will compute the DPI of the X screen from the EDID of any
    connected display devices. See Appendix I for details. Default: string is
    NULL (disabled).

Option "UseEdidDpi" "string"

    By default, the NVIDIA X driver computes the DPI of an X screen based on
    the physical size of the display device, as reported in the EDID, and the
    size in pixels of the first mode to be used on the display device. If
    multiple display devices are used by the X screen, then the NVIDIA X
    screen will choose which display device to use. This option can be used to
    specify which display device to use. The string argument can be a display
    device name, such as:
    
        Option "UseEdidDpi" "DFP-0"
    
    or the argument can be "FALSE" to disable use of EDID-based DPI
    calculations:
    
        Option "UseEdidDpi" "FALSE"
    
    See Appendix I for details. Default: string is NULL (the driver computes
    the DPI from the EDID of a display device and selects the display device).

Option "ConstantDPI" "boolean"

    By default on X.Org 6.9 or newer X servers, the NVIDIA X driver recomputes
    the size in millimeters of the X screen whenever the size in pixels of the
    X screen is changed using XRandR, such that the DPI remains constant.

    This behavior can be disabled (which means that the size in millimeters
    will not change when the size in pixels of the X screen changes) by
    setting the "ConstantDPI" option to "FALSE"; e.g.,
    
        Option "ConstantDPI" "FALSE"
    
    ConstantDPI defaults to True.

    On X servers older than X.Org 6.9, the NVIDIA X driver cannot change the
    size in millimeters of the X screen. Therefore the DPI of the X screen
    will change when XRandR changes the size in pixels of the X screen. The
    driver will behave as if ConstantDPI was forced to FALSE.

Option "CustomEDID" "string"

    This option forces the X driver to use the EDID specified in a file rather
    than the display's EDID. You may specify a semicolon separated list of
    display names and filename pairs. The display name is any of "CRT-0",
    "CRT-1", "DFP-0", "DFP-1", "TV-0", "TV-1". The file contains a raw EDID
    (e.g., a file generated by nvidia-settings).

    For example:
    
        Option "CustomEDID" "CRT-0:/tmp/edid1.bin; DFP-0:/tmp/edid2.bin"
    
    will assign the EDID from the file /tmp/edid1.bin to the display device
    CRT-0, and the EDID from the file /tmp/edid2.bin to the display device
    DFP-0. Note that a display device name must always be specified even if
    only one EDID is specified.

Option "ModeValidation" "string"

    This option provides fine-grained control over each stage of the mode
    validation pipeline, disabling individual mode validation checks. This
    option should only very rarely be used.

    The option string is a semicolon-separated list of comma-separated lists
    of mode validation arguments. Each list of mode validation arguments can
    optionally be prepended with a display device name.
    
        "<dpy-0>: <tok>, <tok>; <dpy-1>: <tok>, <tok>, <tok>; ..."
    
    
    Possible arguments:
    
       o "AllowNon60HzDFPModes": some lower quality TMDS encoders are only
         rated to drive DFPs at 60Hz; the driver will determine when only 60Hz
         DFP modes are allowed. This argument disables this stage of the mode
         validation pipeline.
    
       o "NoMaxPClkCheck": each mode has a pixel clock; this pixel clock is
         validated against the maximum pixel clock of the hardware (for a DFP,
         this is the maximum pixel clock of the TMDS encoder, for a CRT, this
         is the maximum pixel clock of the DAC). This argument disables the
         maximum pixel clock checking stage of the mode validation pipeline.
    
       o "NoEdidMaxPClkCheck": a display device's EDID can specify the maximum
         pixel clock that the display device supports; a mode's pixel clock is
         validated against this pixel clock maximum. This argument disables
         this stage of the mode validation pipeline.
    
       o "AllowInterlacedModes": interlaced modes are not supported on all
         NVIDIA GPUs; the driver will discard interlaced modes on GPUs where
         interlaced modes are not supported; this argument disables this stage
         of the mode validation pipeline.
    
       o "NoMaxSizeCheck": each NVIDIA GPU has a maximum resolution that it
         can drive; this argument disables this stage of the mode validation
         pipeline.
    
       o "NoHorizSyncCheck": a mode's horizontal sync is validated against the
         range of valid horizontal sync values; this argument disables this
         stage of the mode validation pipeline.
    
       o "NoVertRefreshCheck": a mode's vertical refresh rate is validated
         against the range of valid vertical refresh rate values; this
         argument disables this stage of the mode validation pipeline.
    
       o "NoWidthAlignmentCheck": the alignment of a mode's visible width is
         validated against the capabilities of the GPU; normally, a mode's
         visible width must be a multiple of 8. This argument disables this
         stage of the mode validation pipeline.
    
       o "NoDFPNativeResolutionCheck": when validating for a DFP, a mode's
         size is validated against the native resolution of the DFP; this
         argument disables this stage of the mode validation pipeline.
    
       o "NoVirtualSizeCheck": if the X configuration file requests a specific
         virtual screen size, a mode cannot be larger than that virtual size;
         this argument disables this stage of the mode validation pipeline.
    
       o "NoVesaModes": when constructing the mode pool for a display device,
         the X driver uses a built-in list of VESA modes as one of the mode
         sources; this argument disables use of these built-in VESA modes.
    
       o "NoEdidModes": when constructing the mode pool for a display device,
         the X driver uses any modes listed in the display device's EDID as
         one of the mode sources; this argument disables use of EDID-specified
         modes.
    
       o "NoXServerModes": when constructing the mode pool for a display
         device, the X driver uses the built-in modes provided by the core
         XFree86/Xorg X server as one of the mode sources; this argument
         disables use of these modes. Note that this argument does not disable
         custom ModeLines specified in the X config file; see the
         "NoCustomModes" argument for that.
    
       o "NoCustomModes": when constructing the mode pool for a display
         device, the X driver uses custom ModeLines specified in the X config
         file (through the "Mode" or "ModeLine" entries in the Monitor
         Section) as one of the mode sources; this argument disables use of
         these modes.
    
       o "NoPredefinedModes": when constructing the mode pool for a display
         device, the X driver uses additional modes predefined by the NVIDIA X
         driver; this argument disables use of these modes.
    
       o "NoUserModes": additional modes can be added to the mode pool
         dynamically, using the NV-CONTROL X extension; this argument
         prohibits user-specified modes via the NV-CONTROL X extension.
    
    
    Examples:
    
        Option "ModeValidation" "NoMaxPClkCheck"
    
    disable the maximum pixel clock check when validating modes on all display
    devices.
    
        Option "ModeValidation" "CRT-0: NoEdidModes, NoMaxPClkCheck; DFP-0:
    NoVesaModes"
    
    do not use EDID modes and do not perform the maximum pixel clock check on
    CRT-0, and do not use VESA modes on DFP-0.

Option "UseEvents" "boolean"

    Enables the use of system events in some cases when the X driver is
    waiting for the hardware. The X driver can briefly spin through a tight
    loop when waiting for the hardware. With this option the X driver instead
    sets an event handler and waits for the hardware through the 'poll()'
    system call. Default: the use of the events is disabled.

Option "FlatPanelProperties" "string"

    This option requests particular properties for all or a subset of the
    connected flat panels.

    The option string is a semicolon-separated list of comma-separated
    property=value pairs. Each list of property=value pairs can optionally be
    prepended with a flat panel name.
    
        "<DFP-0>: <property=value>, <property=value>; <DFP-1>:
    <property=value>; ..."
    
    
    Recognized properties:
    
       o "Scaling": controls the flat panel scaling mode; possible values are:
         'Default' (the driver will use whichever scaling state is current),
         'Native' (the driver will use the flat panel's scaler, if possible),
         'Scaled' (the driver will use the NVIDIA GPU's scaler, if possible),
         'Centered' (the driver will center the image, if possible), and
         'aspect-scaled' (the X driver will scale with the NVIDIA GPU's
         scaler, but keep the aspect ratio correct).
    
       o "Dithering": controls the flat panel dithering mode; possible values
         are: 'Default' (the driver will decide when to dither), 'Enabled'
         (the driver will always dither, if possible), and 'Disabled' (the
         driver will never dither).
    
    
    Examples:
    
        Option "FlatPanelProperties" "Scaling = Centered"
    
    set the flat panel scaling mode to centered on all flat panels.
    
        Option "FlatPanelProperties" "DFP-0: Scaling = Centered; DFP-1:
    Scaling = Scaled, Dithering = Enabled"
    
    set DFP-0's scaling mode to centered, set DFP-1's scaling mode to scaled
    and its dithering mode to enabled.

Option "ProbeAllGpus" "boolean"

    When the NVIDIA X driver initializes, it probes all GPUs in the system,
    even if no X screens are configured on them. This is done so that the X
    driver can report information about all the system's GPUs through the
    NV-CONTROL X extension. This option can be set to FALSE to disable this
    behavior, such that only GPUs with X screens configured on them will be
    probed. Default: all GPUs in the system are probed.

Option "DynamicTwinView" "boolean"

    Enable or disable support for dynamically configuring TwinView on this X
    screen. When DynamicTwinView is enabled (the default), the refresh rate of
    a mode (reported through XF86VidMode or XRandR) does not correctly report
    the refresh rate, but instead is a unique number such that each MetaMode
    has a different value. This is to guarantee that MetaModes can be uniquely
    identified by XRandR.

    When DynamicTwinView is disabled, the refresh rate reported through XRandR
    will be accurate, but NV-CONTROL clients such as nvidia-settings will not
    be able to dynamically manipulate the X screen's MetaModes. TwinView can
    still be configured from the X config file when DynamicTwinView is
    disabled.

    Default: DynamicTwinView is enabled.

Option "IncludeImplicitMetaModes" "boolean"

    When the X server starts, a mode pool is created per display device,
    containing all the mode timings that the NVIDIA X driver determined to be
    valid for the display device. However, the only MetaModes that are made
    available to the X server are the ones explicitly requested in the X
    configuration file.

    It is convenient for fullscreen applications to be able to change between
    the modes in the mode pool, even if a given target mode was not explicitly
    requested in the X configuration file.

    To facilitate this, the NVIDIA X driver will, if only one display device
    is in use when the X server starts, implicitly add MetaModes for all modes
    in the display device's mode pool. This makes all the modes in the mode
    pool available to full screen applications that use the XF86VidMode or
    XRandR X extensions.

    To prevent this behavior, and only add MetaModes that are explicitly
    requested in the X configuration file, set this option to FALSE.

    Default: IncludeImplicitMetaModes is enabled.


______________________________________________________________________________

Appendix G. Display Device Names
______________________________________________________________________________

A "display device" refers to some piece of hardware capable of displaying an
image. There are three categories of display devices: analog displays (i.e.,
CRTs), digital displays (i.e., digital flat panels (DFPs)), and televisions.
Note that analog flat panels are considered the same as analog CRTs by the
NVIDIA FreeBSD driver.

A "display device name" is a string description that uniquely identifies a
display device; it follows the format "<type>-<number>", for example: "CRT-0",
"CRT-1", "DFP-0", or "TV-0". Note that the number indicates how the display
device connector is wired on the graphics card, and has nothing to do with how
many of that kind of display device are present. This means, for example, that
you may have a "CRT-1", even if you do not have a "CRT-0". To determine which
display devices are currently connected, you may check your X log file for a
line similar to the following:

    (II) NVIDIA(0): Connected display device(s): CRT-0, DFP-0

Display device names can be used in the MetaMode, HorizSync, and VertRefresh X
config options to indicate which display device a setting should be applied
to. For example:

    Option "MetaModes"   "CRT-0: 1600x1200,  DFP-0: 1024x768"
    Option "HorizSync"   "CRT-0: 50-110;     DFP-0: 40-70"
    Option "VertRefresh" "CRT-0: 60-120;     DFP-0: 60"

Specifying the display device name in these options is not required; if
display device names are not specified, then the driver attempts to infer
which display device a setting applies to. In the case of MetaModes, for
example, the first mode listed is applied to the "first" display device, and
the second mode listed is applied to the "second" display device.
Unfortunately, it is often unclear which display device is the "first" or
"second". That is why specifying the display device name is preferable.

When specifying display device names, you may also omit the number part of the
name, though this is only useful if you only have one of that type of display
device. For example, if you have one CRT and one DFP connected, you may
reference them in the MetaMode string as follows:

    Option "MetaModes"   "CRT: 1600x1200,  DFP: 1024x768"


______________________________________________________________________________

Appendix H. GLX Support
______________________________________________________________________________

This release supports GLX 1.4.

Additionally, the following GLX extensions are supported on appropriate GPUs:

   o GLX_EXT_visual_info

   o GLX_EXT_visual_rating

   o GLX_SGIX_fbconfig

   o GLX_SGIX_pbuffer

   o GLX_ARB_get_proc_address

   o GLX_SGI_video_sync

   o GLX_SGI_swap_control

   o GLX_ARB_multisample

   o GLX_NV_float_buffer

   o GLX_ARB_fbconfig_float

   o GLX_NV_swap_group

   o GLX_NV_video_out

   o GLX_EXT_texture_from_pixmap

For a description of these extensions, see the OpenGL extension registry at
http://www.opengl.org/registry/

Some of the above extensions exist as part of core GLX 1.4 functionality,
however, they are also exported as extensions for backwards compatibility.

______________________________________________________________________________

Appendix I. Dots Per Inch
______________________________________________________________________________

DPI (Dots Per Inch), also known as PPI (Pixels Per Inch), is a property of an
X screen that describes the physical size of pixels. Some X applications, such
as xterm, can use the DPI of an X screen to determine how large (in pixels) to
draw an object in order for that object to be displayed at the desired
physical size on the display device.

The DPI of an X screen is computed by dividing the size of the X screen in
pixels by the size of the X screen in inches:

    DPI = SizeInPixels / SizeInInches

Since the X screen stores its physical size in millimeters rather than inches
(1 inch = 25.4 millimeters):

    DPI = (SizeInPixels * 25.4) / SizeInMillimeters

The NVIDIA X driver reports the size of the X screen in pixels and in
millimeters. On X.Org 6.9 or newer, when the XRandR extension resizes the X
screen in pixels, the NVIDIA X driver computes a new size in millimeters for
the X screen, to maintain a constant DPI (see the "Physical Size" column of
the `xrandr -q` output as an example). This is done because a changing DPI can
cause interaction problems for some applications. To disable this behavior,
and instead keep the same millimeter size for the X screen (and therefore have
a changing DPI), set the ConstantDPI option to FALSE (see Appendix F for
details).

You can query the DPI of your X screen by running:


    % xdpyinfo | grep -B1 dot


which should generate output like this:


    dimensions:    1280x1024 pixels (382x302 millimeters)
    resolution:    85x86 dots per inch



The NVIDIA X driver performs several steps during X screen initialization to
determine the DPI of each X screen:


   o If the display device provides an EDID, and the EDID contains information
     about the physical size of the display device, that is used to compute
     the DPI, along with the size in pixels of the first mode to be used on
     the display device. If multiple display devices are used by this X
     screen, then the NVIDIA X screen will choose which display device to use.
     You can override this with the "UseEdidDpi" X configuration option: you
     can specify a particular display device to use; e.g.:
     
         Option "UseEdidDpi" "DFP-1"
     
     or disable EDID-computed DPI by setting this option to false:
     
         Option "UseEdidDpi" "FALSE"
     
     EDID-based DPI computation is enabled by default when an EDID is
     available.

   o If the "-dpi" commandline option to the X server is specified, that is
     used to set the DPI (see `X -h` for details). This will override the
     "UseEdidDpi" option.

   o If the "DPI" X configuration option is specified (see Appendix F for
     details), that will be used to set the DPI. This will override the
     "UseEdidDpi" option.

   o If none of the above are available, then the "DisplaySize" X config file
     Monitor section information will be used to determine the DPI, if
     provided; see the xorg.conf or XF86Config man pages for details.

   o If none of the above are available, the DPI defaults to 75x75.


You can find how the NVIDIA X driver determined the DPI by looking in your X
log file. There will be a line that looks something like the following:

    (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
option


Note that the physical size of the X screen, as reported through `xdpyinfo` is
computed based on the DPI and the size of the X screen in pixels.

The DPI of an X screen can be confusing when TwinView is enabled: with
TwinView, multiple display devices (possibly with different DPIs) display
portions of the same X screen, yet DPI can only be advertised from the X
server to the X application with X screen granularity. Solutions for this
include:


   o Use separate X screens, rather than TwinView; see Chapter 12 for details.

   o Experiment with different DPI settings to find a DPI that is suitable for
     both display devices.


______________________________________________________________________________

Appendix J. Tips for New FreeBSD Users
______________________________________________________________________________

This installation guide assumes that the user has at least a basic
understanding of FreeBSD techniques and terminology. In this section we
provide tips that the new user may find helpful. While the these tips are
meant to clarify and assist users in installing and configuring the NVIDIA
FreeBSD Driver, it is by no means a tutorial on the use or administration of
the FreeBSD operating system. Unlike many desktop operating systems, it is
relatively easy to cause irreparable damage to your FreeBSD system. If you are
unfamiliar with the use of FreeBSD, we strongly recommend that you seek a
tutorial through your distributor before proceeding.


J1. THE COMMAND PROMPT

While newer releases of FreeBSD bring new desktop interfaces to the user, much
of the work in FreeBSD takes place at the command prompt. If you are familiar
with the Windows operating system, the FreeBSD command prompt is analogous to
the Windows command prompt, although the syntax and use varies somewhat. All
of the commands in this section are performed at the command prompt. Some
systems are configured to boot into console mode, in which case the user is
presented with a prompt at login. Other systems are configured to start the X
window system, in which case the user must open a terminal or console window
in order to get a command prompt. This can usually be done by searching the
desktop menus for a terminal or console program. While it is customizable, the
basic prompt usually consists of a short string of information, one of the
characters '#', '$', or '%', and a cursor (possibly flashing) that indicates
where the user's input will be displayed.


J2. NAVIGATING THE DIRECTORY STRUCTURE

FreeBSD has a hierarchical directory structure. From anywhere in the directory
structure, the 'ls' command will list the contents of that directory. The
'file' command will print the type of files in a directory. For example,

    % file filename

will print the type of the file 'filename'. Changing directories is done with
the 'cd' command.

    % cd dirname

will change the current directory to 'dirname'. From anywhere in the directory
structure, the command 'pwd' will print the name of the current directory.
There are two special directories, '.' and '..', which refer to the current
directory and the next directory up the hierarchy, respectively. For any
commands that require a file name or directory name as an argument, you may
specify the absolute or the relative paths to those elements. An absolute path
begins with the "/" character, referring to the top or root of the directory
structure. A relative path begins with a directory in the current working
directory. The relative path may begin with '.' or '..'. Elements of a path
are separated with the "/" character. As an example, if the current directory
is '/home/jesse' and the user wants to change to the '/usr/local' directory,
he can use either of the following commands to do so:

    % cd /usr/local

or

    % cd ../../usr/local



J3. FILE PERMISSIONS AND OWNERSHIP

All files and directories have permissions and ownership associated with them.
This is useful for preventing non-administrative users from accidentally (or
maliciously) corrupting the system. The permissions and ownership for a file
or directory can be determined by passing the -l option to the 'ls' command.
For example:

% ls -l
drwxr-xr-x     2    jesse    users    4096    Feb     8 09:32 bin
drwxrwxrwx    10    jesse    users    4096    Feb    10 12:04 pub
-rw-r--r--     1    jesse    users      45    Feb     4 03:55 testfile
-rwx------     1    jesse    users      93    Feb     5 06:20 myprogram
-rw-rw-rw-     1    jesse    users     112    Feb     5 06:20 README
% 

The first character column in the first output field states the file type,
where 'd' is a directory and '-' is a regular file. The next nine columns
specify the permissions (see paragraph below) of the element. The second field
indicates the number of files associated with the element, the third field
indicates the owner, the fourth field indicates the group that the file is
associated with, the fifth field indicates the size of the element in bytes,
the sixth, seventh and eighth fields indicate the time at which the file was
last modified and the ninth field is the name of the element.

As stated, the last nine columns in the first field indicate the permissions
of the element. These columns are grouped into threes, the first grouping
indicating the permissions for the owner of the element ('jesse' in this
case), the second grouping indicating the permissions for the group associated
with the element, and the third grouping indicating the permissions associated
with the rest of the world. The 'r', 'w', and 'x' indicate read, write and
execute permissions, respectively, for each of these associations. For
example, user 'jesse' has read and write permissions for 'testfile', users in
the group 'users' have read permission only, and the rest of the world also
has read permissions only. However, for the file 'myprogram', user 'jesse' has
read, write and execute permissions (suggesting that 'myprogram' is a program
that can be executed), while the group 'users' and the rest of the world have
no permissions (suggesting that the owner doesn't want anyone else to run his
program). The permissions, ownership and group associated with an element can
be changed with the commands 'chmod', 'chown' and 'chgrp', respectively. If a
user with the appropriate permissions wanted to change the user/group
ownership of 'README' from jesse/users to joe/admin, he would do the
following:

    # chown joe README
    # chgrp admin README

The syntax for chmod is slightly more complicated and has several variations.
The most concise way of setting the permissions for a single element uses a
triplet of numbers, one for each of user, group and world. The value for each
number in the triplet corresponds to a combination of read, write and execute
permissions. Execute only is represented as 1, write only is represented as 2,
and read only is represented as 4. Combinations of these permissions are
represented as sums of the individual permissions. Read and execute is
represented as 5, where as read, write and execute is represented as 7. No
permissions is represented as 0. Thus, to give the owner read, write and
execute permissions, the group read and execute permissions and the world no
permissions, a user would do as follows:

    % chmod 750 myprogram



J4. THE SHELL

The shell provides an interface between the user and the operating system. It
is the job of the shell to interpret the input that the user gives at the
command prompt and call upon the system to do something in response. There are
several different shells available, each with somewhat different syntax and
capabilities. The two most common flavors of shells used on FreeBSD stem from
the Bourne shell ('sh') and the C-shell ('csh') Different users have
preferences and biases towards one shell or the other, and some certainly make
it easier (or at least more intuitive) to do some things than others. You can
determine your current shell by printing the value of the 'SHELL' environment
variable from the command prompt with

    % echo $SHELL

You can start a new shell simply by entering the name of the shell from the
command prompt:

    % csh

or

    % sh

and you can run a program from within a specific shell by preceding the name
of the executable with the name of the shell in which it will be run:

    % sh myprogram

The user's default shell at login is determined by whoever set up his account.
While there are many syntactic differences between shells, perhaps the one
that is encountered most frequently is the way in which environment variables
are set.


J5. SETTING ENVIRONMENT VARIABLES

Every session has associated with it environment variables, which consist of
name/value pairs and control the way in which the shell and programs run from
the shell behave. An example of an environment variable is the 'PATH'
variable, which tells the shell which directories to search when trying to
locate an executable file that the user has entered at the command line. If
you are certain that a command exists, but the shell complains that it cannot
be found when you try to execute it, there is likely a problem with the 'PATH'
variable. Environment variables are set differently depending on the shell
being used. For the Bourne shell ('sh'), it is done as:

    % export MYVARIABLE="avalue"

for the C-shell, it is done as:

    % setenv MYVARIABLE "avalue"

In both cases the quotation marks are only necessary if the value contains
spaces. The 'echo' command can be used to examine the value of an environment
variable:

    % echo $MYVARIABLE

Commands to set environment variables can also include references to other
environment variables (prepended with the "$" character), including
themselves. In order to add the path '/usr/local/bin' to the beginning of the
search path, and the current directory '.' to the end of the search path, a
user would enter

    % export PATH=/usr/local/bin:$PATH:.

in the Bourne shell, and

    % setenv PATH /usr/local/bin:${PATH}:.

in C-shell. Note the curly braces are required to protect the variable name in
C-shell.


J6. EDITING TEXT FILES

There are several text editors available for the FreeBSD operating system.
Some of these editors require the X window system, while others are designed
to operate in a console or terminal. It is generally a good thing to be
competent with a terminal-based text editor, as there are times when the files
necessary for X to run are the ones that must be edited. Three popular editors
are 'vi', 'pico' and 'emacs', each of which can be started from the command
line, optionally supplying the name of a file to be edited. 'vi' is arguably
the most ubiquitous as well as the least intuitive of the three. 'pico' is
relatively straightforward for a new user, though not as often installed on
systems. If you don't have 'pico', you may have a similar editor called
'nano'. 'emacs' is highly extensible and fairly widely available, but can be
somewhat unwieldy in a non-X environment. The newer versions each come with
online help, and offline help can be found in the manual and info pages for
each (see the section on FreeBSD Manual and Info pages). Many programs use the
'EDITOR' environment variable to determine which text editor to start when
editing is required.


J7. ROOT USER

Upon installation, almost all distributions set up the default administrative
user with the username 'root'. There are many things on the system that only
'root' (or a similarly privileged user) can do, one of which is installing the
NVIDIA FreeBSD Driver. WE MUST EMPHASIZE THAT ASSUMING THE IDENTITY OF 'root'
IS INHERENTLY RISKY AND AS 'root' IT IS RELATIVELY EASY TO CORRUPT YOUR SYSTEM
OR OTHERWISE RENDER IT UNUSABLE. There are three ways to become 'root'. You
may log in as 'root' as you would any other user, you may use the switch user
command ('su') at the command prompt, or, on some systems, use the 'sudo'
utility, which allows users to run programs as 'root' while keeping a log of
their actions. This last method is useful in case a user inadvertently causes
damage to the system and cannot remember what he has done (or prefers not to
admit what he has done). It is generally a good practice to remain 'root' only
as long as is necessary to accomplish the task requiring 'root' privileges
(another useful feature of the 'sudo' utility).


J8. FREEBSD MANUAL AND INFO PAGES

System manual or info pages are usually installed during installation. These
pages are typically up-to-date and generally contain a comprehensive listing
of the use of programs and utilities on the system. Also, many programs
include the --help option, which usually prints a list of common options for
that program. To view the manual page for a command, enter

    % man commandname

at the command prompt, where commandname refers to the command in which you
are interested. Similarly, entering

    % info commandname

will bring up the info page for the command. Depending on the application, one
or the other may be more up-to-date. The interface for the info system is
interactive and navigable. If you are unable to locate the man page for the
command you are interested in, you may need to add additional elements to your
'MANPATH' environment variable. See the section on environment variables.

